11Mbps Outdoor Access Point (Integrated Antenna)


 11mbps Outdoor Access Point (Integrated Antenna)
Part#: APPtotal



Built in High Gain Antenna

Weather Proof Enclosure

Connects to any Ethernet device

11Mbps Transfer Rate

Integrated PoE Adapter


Technical Specs.



Not In StockAPPtotalContact Us for Replacement




Comes with Integrated 13dBi High Gain Antenna inside a weather proof outdoor enclosure.


This SmartBridge access point can be mounted outdoors, and can be powered through the integrated Power-over-Ethernet adapter that comes with the unit.  This means that this

access point can be placed up to 300ft. away from your network, with only a single cat5 cable connecting to it.


AirBridge™ is the preferred CPE solution which makes this possible, providing excellent performance and enhanced security for users. AirBridge now comes with new enhancements like Surge Protection Circuit and an external N Connector.  Mount the CPE device outdoors,

and run an Ethernet cable down to your wired/wireless network device.

AirBridge™ is a 2.4 GHz 802.11b compatible client device that is based on the coveted AirBridge™ core design. The AirBridge™ is  encapsulated into a single neat NEMA 4X device. 

To enhance deployment flexibility, an external N connector has been added. If during installation it is discovered that a higher gain external antenna is required, this can be 

connected to the external N connector.  

The Surge Protection circuit in the AirBridge brings carrier-class protection for long lasting performance. Designed with ease of installation in mind, AirBridge™ simplifies subscriber installation with its Integrated Power over Ethernet (PoE), 'Plug and Play' installation, extended temperature range and a software controlled 'dial a power' capability. It supports 

roaming, firmware upgrade across subnets and PPPoE.


The AirBridge client device will work well in many Basestation applications like:

  • Marinas
  • Truck Stops
  • RV-Parks
  • Hotels
  • Building-to-Building Wireless Bridge setups
  • Wireless Hotspots

Features at a glance

  • Multi-Mac support to connect LAN to the wireless network.
  • Rugged weatherproof design in a compact and stylish enclosure.
  • Ideal for wireless LAN access in all indoor and outdoor areas.
  • Flexible mounting on wall or antenna mast (up to 2 inch diameter).
  • Can be mounted for Horizontal or Vertical Polarities.
  • High receiver sensitivity; provides error free data transfer.
  • Auto Fall back data rate for long distance communication in noisy environments.
  • Powered through Ethernet cable using powerShot™ PoE injector.
  • Driver-less operation with true 'Plug and Play' (in single MAC mode).
  • Works with all Operating Systems.
  • High level security with full 128 bit Key WEP encryption.
  • Compatible with IEEE 802.11b & IEEE 802.3 standards.
  • Firmware is upgradeable to protect your investment.


Multiple Antennae Compatibility - The airBridge™ Outdoor has been FCC certified with many antenna configurations normally used by WISPs and wireless installers. This provides a much needed flexibility to choose the right antenna with the pattern and gain characteristics to conform to local regulatory limits. This makes it investment friendly, since it gives choice of antenna equipment across multiple vendors


Superior Operating Range - airBridge™ outdoor features LongRange™ 802.11b radio that provides enhanced power to deliver high data throughput and long operating range. SmartBridges' superior design of the radio receiver allows it to listen to the smallest incoming signals. These superior receiver and transmitter characteristics result in long-range wireless coverage. With a suitable external antenna, the range extends over 34 kilometers (21 miles)

in free open space.


Proven Performance in Harsh Environments - Housed in a NEMA 4X weatherproof casing, the airBridge™ Outdoor is built to operate in harsh environments. This device can be installed on the building exterior as well as indoors. AirBridge™ Outdoor delivers reliable performance under all climatic conditions, withstanding temperatures between -40 C to +65 C (-40 F to 150 F). It is the perfect solution for wireless applications in dusty, wet, oily environments like a factory or a chemical plant.


Easy Installation - The self-contained airBridge™ Outdoor unit can be mounted on a pole or wall. With the powerShot™, a standard PoE injector, the airBridge™ Outdoor can be powered over an outdoor rated Ethernet cable provided with the unit. airBridge™ Outdoor also features plug-and-play installation that enables quick and efficient deployment. It works with all WiFi™ compatible Access Points and eliminates complicated client installations and driver conflicts with various OS.


Easy to Monitor and Manage - AirBridge™ is supported by simpleMonitor, an advanced Management tool designed using Open Systems architecture. It utilizes popular network management standards (SNMP) to manage the wireless-centric network device parameters such as, channel selection, network association, data rate and site survey etc. Its graphical user interface is extremely intuitive for navigating, examining, and managing the airBridge™ Outdoor.


Technical Specs.

Standard IEEE 802.11b
Data Rates Supported 1, 2, 5.5 and 11 Mbps
LAN Interface 10BaseT Ethernet - 1 foot outdoor rated CAT5 cable connected to the device and terminated into an all weather RJ45 female connector.
Frequency Band 2.4GHz to 2.5GHz
Wireless Medium Direct Sequence Spread Spectrum (DSSS)
Media Access Protocol Carrier sense multiple access with collision avoidance (CSMA/CA)
Modulation DSSS with CCK / DQPSK / DBPSK
Operating Channels 11 FCC, 13 ETSI, 14 Japan, France 4, Other countries FCC 11
Non-overlapping Channels 3
Receive Sensitivity -107dBm at 1Mbps
Output Power (with built in antenna) Up to 30dBm EIRP (max) with 13 dBi built in antenna. Can be adjusted to 24dBm (min) using “Dial-a-Power” software.
Output Power (at the N connector for external antenna) Adjustable from +17.5dBm (max) to +11.5dBm (min) by using "Dial-a-Power" software.
Range Varies depending on antenna used
Integrated Antenna FCC version has 13dBi Flat Panel. Beam width of 28 degrees, greater than 18dB front to back ratio.

N (Female) Bulkhead Mount, 50 ohms
Compliance USA: FCC 47 CFR Part 15C, Section 15.247 - FCC Certification- ID: PWG DOLPHIN
Canada: RSS 139
SNMP Compliance MIB I and MIB II
Management SNMP ver 1 (MIB, Traps); TFTP (FW download), simpleNMS
Encryption Key Length 64-bit & 128-bit WEP
Remote Configuration Support simpleMonitor, simpleDeploy, simpleNMS
Dimension (W x D x H) 180mm x 180mm x 60mm
(7.07 inches x 7.07 inches x 2.36 inches) excluding mounting clamps
Unit Weight 0.95 kg (2.09 lbs)
Shipping Weight 1.70 kg (3.75 lbs)
Environmental Operating Temperature -40 deg C (-40 F) to +65 deg C (+150 F)
Relative Humidity Operating: 0 to 70% (non-condensing)
Storage: 10 to 90% (non-condensing)
Mounting Pole or wall mount via 2 pc U-Bolts & clamps (included)
Enclosure (including IO ports) Water Tight to NEMA 1, 4, 4X, 6, 12, 13; IP65 (EN 60529); IK07 (EN 50102)
Power Consumption 500 mA at 12V DC
Cable 100 meter maximum cat5 cable
LEDs Power, Ethernet, Transmission
Power Supply 12 V DC External Adapter provided.(100 V ~ 264 V / 50 ~60 Hz AC IN 12V DC OUT) Input: 90 to 260V AC, 50 / 60Hz, output: 12V DC, 1A 12 to 50V DC



In StockAPPtotalContact Us to Buy




Pre-Fabricated Cat5

All Lengths available







Click for More Info.



Linksys WAP54G

54Mbps Wireless Access Point


Part#: WAP54G

Price: $71.99




Click for More Info.




Return Policy | Terms and Conditions | FAQ | About Us | Contact Us

Copyright © GNS Wireless LLC., 2014