Cisco AIR-LAP1131AG-A-K9 802.11a/g Non-modular LWAPP AP;

 Integrated Antenna; FCC Cnfg

 

Part#: AIR-LAP1131AG-A-K9
Price:

CALL

 

Includes: 802.11a/g Non-modular LWAPP AP: Integrated Antennas

 

Features:
108Mbps

Wireless Access Point

AES-CCMP Encryption (WPA2)

1130AG Series Wireless Access Point

802.11a/g, 20dBm 802.11g

 

 

 

 

 

Stock:  CALLAIR-LAP1131AG-A-K9Contact Us to Buy

Cisco Aironet 1130AG Series IEEE 802.11a/b/g access points provide high-capacity, high-security, enterprise-class features in an unobtrusive, office-class design, delivering WLAN access with the lowest total cost of ownership. With high-performing dual IEEE 802.11a and 802.11g radios, the Cisco Aironet 1130AG Series provides a combined capacity of up to 108 Mbps to meet the needs of growing WLANs. Hardware-assisted Advanced Encryption Standard (AES) or temporal key integrity protocol (TKIP) encryption provides uncompromised support for interoperable IEEE 802.11i, Wi-Fi Protected Access 2 (WPA2) or WPA security. The Cisco Aironet 1130AG Series uses radio and network management features for simplified deployment, along with built-in omnidirectional antennas that provide robust and predictable WLAN coverage for offices and similar RF environments. The competitively priced Cisco Aironet 1130AG Series is ready to install and easy to manage, reducing the cost of deployment and ongoing maintenance.

The Aironet 1130AG Series is available in:

  • A lightweight version
  • An autonomous version that can be field-upgraded to lightweight operation
  • A single-band 802.11g version for use in regulatory domains that do not allow 802.11a/5 GHz operation

The Cisco Aironet 1130AG Series is available in two versions: unified or autonomous. Unified access points operate with the Lightweight Access Point Protocol (LWAPP) and work in conjunction with Cisco wireless LAN controllers and the Cisco Wireless Control System (WCS). When configured with LWAPP, the Cisco Aironet 1130AG Series can automatically detect the best-available Cisco wireless LAN controller and download appropriate policies and configuration information with no manual intervention. Autonomous access points are based on Cisco IOS Software and may optionally operate with the CiscoWorks Wireless LAN Solution Engine (WLSE). Autonomous access points, along with the CiscoWorks WLSE, deliver a core set of features and may be field-upgraded to take advantage of the full benefits of the Cisco Unified Wireless Network as requirements evolve.

The Cisco Aironet 1130AG Series delivers optimal value for offices and similar environments. Built-in antennas provide omnidirectional coverage specifically designed for today's open workspaces. A multipurpose mounting bracket easily secures Cisco Aironet 1130AG Series access points to ceilings and walls. With an unobtrusive design, Cisco Aironet 1130AG Series access points are aesthetically pleasing and blend into their environments. For maximum concealment, the access point may be placed above ceilings or suspended ceilings. The UL 2043 rating of the Cisco Aironet 1130AG Series allows the access point to be placed above ceilings in plenum areas regulated by municipal fire codes. Offered at a competitive price, and optimized for easy installation and operation, the Cisco Aironet 1130AG Series helps organizations attain a lower total cost of ownership.

Applications
In offices and similarly open environments, Cisco Aironet 1130AG Series access points may be installed on the ceiling to provide users with continuous coverage as they roam throughout a facility. In school buildings and similar facilities, the access points may be installed on the ceiling of each room and hallway to provide users with full coverage and high network availability. In areas where a ceiling installation may not be practical such as retail hotspots or similar small facilities, the access points can be mounted simply and securely on walls for complete coverage with minimal installation cost.

Award-Winning Security
The Cisco Aironet 1130AG Series has achieved National Institute of Standards and Technology (NIST) FIPS 140-2 level 2 validation and is in process for Information Assurance validation under the National Information Assurance Partnership (NIAP) Common Criteria program. The Cisco Aironet 1130AG Series supports 802.11i, Wi-Fi Protected Access (WPA), WPA2, and numerous Extensible Authentication Protocol (EAP) types. WPA and WPA2 are the Wi-Fi Alliance certifications for interoperable, standards-based WLAN security. These certifications support IEEE 802.1X for user-based authentication, Temporal Key Integrity Protocol (TKIP) for WPA encryption, and Advanced Encryption Standard (AES) for WPA2 encryption. These certifications help to ensure interoperability between Wi-Fi-certified WLAN devices from different manufacturers.

The Cisco Aironet 1130AG Series hardware-accelerated AES encryption supports enterprise-class, government-grade secure encryption over the WLAN without compromising performance. IEEE 802.1X authentication helps to ensure that only authorized users are allowed on the network. Backward compatibility and support for WPA client devices running TKIP, the RC4 encryption algorithm, is also supported by the Cisco Aironet 1130AG Series.

Cisco Aironet 1130AG Series Access Points operating with LWAPP support Cisco Unified Intrusion Detection System/Intrusion Prevention System (IDS/IPS), a software feature that is part of the Cisco Self-Defending Network and is the industry's first integrated wired and wireless security solution. Cisco Unified IDS/IPS takes a comprehensive approach to security-at the wireless edge, wired edge, WAN edge, and through the data center. When an associated client sends malicious traffic through the Cisco Unified Wireless Network, a Cisco wired IDS device detects the attack and sends shun requests to Cisco wireless LAN controllers, which will then disassociate the client device.

Autonomous or unified Cisco Aironet 1130AG Series Access Points support management frame protection for the authentication of 802.11 management frames by the wireless network infrastructure. This allows the network to detect spoofed frames from access points or malicious users impersonating infrastructure access points. If an access point detects a malicious attack, an incident will be generated by the access point and reports will be gathered on the Cisco wireless LAN controller, Cisco WCS, or CiscoWorks WLSE.

 

 

 

 
 
Feature Benefit
Dual 802.11a and 802.11g Radios Provides up to 108 Mbps of capacity in a single device for industry-leading capacity and backward compatibility with legacy 802.11b clients.
Supports 15 Nonoverlapping Channels
  • Lower potential interference with neighboring access points simplifies deployment
  • Fewer transmission errors deliver greater throughput
Industry-Leading Radio Design
  • Provides robust signals to long distances
  • Mitigates the effects of multipath signal propagation for more consistent coverage.
Variable Transmit Power Settings
  • Allows access point coverage to be tuned for differing requirements
  • Low-dBm setting supports closer spacing of access points in high-density deployments.
Integrated Antennas
  • Complete system is deployable out of the box without external antennas
  • Specifically designed to provide omnidirectional coverage for offices and similar radio frequency environments.
Hardware-Assisted AES Encryption Provides high security without performance degradation
Cisco Unified IDS/IPS This integrated software feature is part of the Cisco Self-Defending Network and is the industry's first integrated wired and wireless security solution. When a trusted client acts maliciously, the wired IDS detects the attack and sends shun requests to Cisco WLAN controllers, which will then disassociate the client device.
Management Frame Protection This feature provides for the authentication of 802.11 management frames by the wireless network infrastructure. This allows the network to detect spoofed frames from access points or malicious users impersonating infrastructure access points. If an access point detects a malicious attack, an incident will be generated by the access points and reports will be gathered on the Cisco wireless LAN controller, Cisco WCS, or CiscoWorks WLSE.
IEEE 802.11i-Compliant; WPA2-Certified and WPA-Certified Helps to ensure interoperable security with wireless LAN client devices from other manufacturers
Low-Profile Design
  • Unobtrusive design blends in to environment
  • "Quiet" LED does not draw attention to it when operating normally and no action is required
Multipurpose and Lockable Mounting Bracket
  • Installs easily to walls, ceilings, and suspended ceiling railways
  • Accommodates standard padlock to prevent theft
Inline Power Support (IEEE 802.3af and Cisco Inline Power)
  • Provides an interoperable alternative to AC power
  • Simplifies deployment by allowing power to be supplied over the Ethernet cable
  • Compatible with 802.3af-compliant power sources
Cisco Green Bulk Packaging To reduce product packaging and preserve the environment, the Cisco Aironet 1130 Series may be ordered in a bulk package that includes 10 access points and 10 mounting kits.

 

Cisco Aironet 1130AG Series Access Points Specification

Software

  • Cisco IOS Software Release 12.3(8)JA or later (autonomous).

  • Cisco IOS Software Release 12.3(11)JX or later (Lightweight Mode).

  • Cisco Unified Wireless Network Software Release 4.0 or later.

Data Rates Supported

  • 802.11a: 6, 9, 12, 18, 24, 36, 48, and 54 Mbps

  • 802.11g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps

Network Standard

  • IEEE 802.11a, 802.11b, and 802.11g

Uplink

  • Autosensing 802.3 10/100BASE-T Ethernet

Frequency Band and Operating Channels

Americas (FCC)

  • 2.412 to 2.462 GHz; 11 channels

  • 5.15 to 5.35, 5.725 to 5.825 GHz; 12 channels

China

  • 2.412 to 2.472 GHz; 13 channels

  • 5.725 to 5.825 GHz; 4 channels ETSI

ETSI

  • 2.412 to 2.472 GHz; 13 channels

  • 5.15 to 5.725 GHz; 19 channels

Israel

  • 2.432 to 2.472 GHz; 9 channels

  • 5.15 to 5.35 GHz; 8 channels

Japan (TELEC)

  • 2.412 to 2.472 GHz; 13 channels Orthogonal Frequency Division Multiplexing (OFDM)

  • 2.412 to 2.484 GHz; 14 channels Complementary Code Keying (CCK)

  • 5.15 to 5.25 GHz; 4 channels

Japan-P (TELEC 2 [Japan2] Cnfg)

  • 2.412 to 2.472 GHz; 13 channels Orthogonal Frequency Division Multiplexing

  • 5.15 to 5.35 GHz, 8 channels

Korea

  • 2.412 to 2.472 GHz; 13 channels

  • 5.15 to 5.35, 5.46 to 5.72, 5.725 to 5.825; 19 channels

North America (not FCC)

  • 2.412 to 2.462 GHz; 11 channels

  • 5.15 to 5.35, 5.725 to 5.825 GHz; 12 channels

Singapore

  • 2.412 to 2.472 GHz; 13 channels

  • 5.15 to 5.35, 5.725 to 5.825 GHz; 12 channels

Taiwan

  • 2.412 to 2.462 GHz; 11 channels

  • 5.25-5.35 GHz, 5.725 to 5.825, 7 channels

Non-overlapping Channels 802.11a: Up to 19 802.11b/g: 3
Receive Sensitivity (Typical) 802.11a:
  • 6 Mbps: -87 dBm
  • 9 Mbps: -87 dBm
  • 12 Mbps: -85 dBm
  • 18 Mbps: -84 dBm
  • 24 Mbps: -81 dBm
  • 36 Mbps: -78 dBm
  • 48 Mbps: -73 dBm
  • 54 Mbps: -71 dBm
802.11g:
  • 1 Mbps: -93 dBm
  • 2 Mbps: -91 dBm
  • 5.5 Mbps: -88 dBm
  • 6 Mbps: -86 dBm
  • 9 Mbps: -85 dBm
  • 11 Mbps: -85 dBm
  • 12 Mbps: -84 dBm
  • 18 Mbps: -83 dBm
  • 24 Mbps: -79 dBm
  • 36 Mbps: -77 dBm
  • 48 Mbps: -72 dBm
  • 54 Mbps: -70 dBm
Available Transmit Power Settings (Maximum Power Setting will Vary by Channel and According to Individual Country Regulations) 802.11a
  • OFDM:
  •  17 dBm (50 mW)
  • 15 dBm (30 mW)
  • 14 dBm (25 mW)
  • 11 dBm (12 mW)
  • 8 dBm (6 mW)
  • 5 dBm (3 mW)
  • 2 mW (2 dBm)
  • -1 dBm (1 mW)
802.11g
  • CCK:
  • 20 dBm (100 mW)
  • 17 dBm (50 mW)
  • 14 dBm (25 mW)
  • 11 dBm (12 mW)
  • 8 dBm (6 mW)
  • 5 dBm (3 mW)
  • 2 dBm (2 mW)
  • -1 dBm (1 mW)
OFDM
  • 17 dBm (50 mW)
  • 14 dBm (25 mW)
  • 11 dBm (12 mW)
  • 8 dBm (6 mW)
  • 5 dBm (3 mW)
  • 2 dBm (2 mW)
  • -1 dBm (1 mW)
Range Indoor (Distance Across Open Office Environment): Outdoor:
802.11a:
  • 80 ft (24 m) @ 54 Mbps
  • 150 ft (45 m) @ 48 Mbps
  • 200 ft (60 m) @ 36 Mbps
  • 225 ft (69 m) @ 24 Mbps
  • 250 ft (76 m) @ 18 Mbps
  • 275 ft (84 m) @ 12 Mbps
  • 300 ft (91 m) @ 9 Mbps
  • 325 ft (100 m) @ 6 Mbps
802.11g:
  • 100 ft (30 m) @ 54 Mbps
  • 175 ft (53 m) @ 48 Mbps
  • 250 ft (76 m) @ 36 Mbps
  • 275 ft (84 m) @ 24 Mbps
  • 325 ft (100 m) @ 18 Mbps
  • 350 ft (107 m) @ 12 Mbps
  • 360 ft (110 m) @ 11 Mbps
  • 375 ft (114 m) @ 9 Mbps
  • 400 ft (122 m) @ 6 Mbps
  • 420 ft (128 m) @ 5.5 Mbps
  • 440 ft (134 m) @ 2 Mbps
  • 450 ft (137 m) @ 1 Mbps
802.11a:
  • 100 ft (30 m) at 54 Mbps
  • 300 ft (91 m) at 48 Mbps
  • 425 ft (130 m) at 36 Mbps
  • 500 ft (152 m) at 24 Mbps
  • 550 ft (168 m) at 18 Mbps
  • 600 ft (183 m) at 12 Mbps
  • 625 ft (190 m) at 9 Mbps
  • 650 ft (198 m) at 6 Mbps
802.11g:
  • 120 ft (37 m) at 54 Mbps
  • 350 ft (107 m) at 48 Mbps
  • 550 ft (168 m) at 36 Mbps
  • 650 ft (198 m) at 24 Mbps
  • 750 ft (229 m) at 18 Mbps
  • 800 ft (244 m) at 12 Mbps
  • 820 ft (250 m) at 11 Mbps
  • 875 ft (267 m) at 9 Mbps
  • 900 ft (274 m) at 6 Mbps
  • 910 ft (277 m) at 5.5 Mbps
  • 940 ft (287 m) at 2 Mbps
  • 950 ft (290 m) at 1 Mbps
Ranges and actual throughput vary based upon numerous environmental factors so individual performance may differ.
Compliance Standards

Safety:

  • UL 60950-1
  • CAN/CSA-C22.2 No. 60950-1
  • UL 2043
  • IEC 60950-1
  • EN 60950-1
  • NIST FIPS 140-2 level 2 validation

Radio approvals:

  • FCC Part 15.247, 15.407
  • RSS-210 (Canada)
  • EN 300.328, EN 301.893 (Europe)
  • ARIB-STD 33 (Japan)
  • ARIB-STD 66 (Japan)
  • ARIB-STD T71 (Japan)
  • AS/NZS 4268.2003 (Australia and New Zealand)

EMI and susceptibility (Class B)

  • FCC Part 15.107 and 15.109
  • ICES-003 (Canada)
  • VCCI (Japan)
  • EN 301.489-1 and -17 (Europe)

Security:

  • 802.11i, WPA2, WPA
  • 802.1X
  • AES, TKIP
  • FIPS 140-2 Pre-Validation List
  • Common Criteria (when running Cisco IOS software)

Other:

  • IEEE 802.11g and IEEE 802.11a
  • FCC Bulletin OET-65C
  • RSS-102
Antenna 2.4 GHz
  • Gain 3.0 dBi
  • Horizontal Beamwidth 360

5 GHz

  • Gain 4.5 dBi
  • Horizontal Beamwidth 360
Security Authentication:
  • Security Standards
  • WPA
  • WPA2 (802.11i)
  • Cisco TKIP
  • Cisco message integrity check (MIC)
  • IEEE 802.11 WEP keys of 40 bits and 128 bits

802.1X EAP types:

  • EAP-Flexible Authentication via Secure Tunneling (EAP-FAST)
  • Protected EAP-Generic Token Card (PEAP-GTC)
  • PEAP-Microsoft Challenge Authentication Protocol Version 2 (PEAP-MSCHAP)
  • EAP-Transport Layer Security (EAP-TLS)
  • EAP-Tunneled TLS (EAP-TTLS)
  • EAP-Subscriber Identity Module (EAP-SIM)
  • Cisco LEAP

Encryption:

  • AES-CCMP encryption (WPA2)
  • TKIP (WPA)
  • Cisco TKIP
  • WPA TKIP
  • IEEE 802.11 WEP keys of 40 bits and 128 bits
Status LEDs External:
  • Status LED indicates operating state, association status, error/warning condition, boot sequence, and maintenance status

Internal:

  • Ethernet LED indicates activity over the Ethernet, status
  • Radio LED indicates activity over the radios, status
Dimensions
(H x W x D)
7.5 in. x 7.5 in. x 1.3 in. (19.1 x 19.1 x 3.3 cm)
Weight 1.5 lb (0.67 kg)
Environmental
  • 32-104F (0-40C)
  • 10-90 percent humidity (noncondensing)
System Memory
  • 32 MB RAM
  • 16 MB Flash
Input Power Requirements
  • 100-240 VAC; 50-60Hz (power supply)
  • 36-57 VDC (device)
Power Draw 12.2W maximum
Warranty One Year
Wi-Fi Certification
System Requirements
Browser Using the Web browser management GUI requires a computer running Internet Explorer Version 6.0 or later, or Netscape Navigator Version 7.0 or later.
PoE Power sourcing equipment compliant with Cisco inline power or IEEE 802.3af, and providing at least 12.2W at 48 VDC

 

 
 
   

Return Policy | Terms and Conditions | FAQ | About Us | Contact Us



Copyright GNS Wireless LLC., 2014

All Major Cards Accepted