DWL-7230 xStack Access Point with PoE - 802.11a/g

 

 

Part#: DWL-7230AP
Price:

$329.99

 

Features:
Designed for Use with xStack

Supports WPA2 Encryption

Supports 802.11a, 802.11b, & 802.11g

Supports Power over Ethernet

 

 

 

Not In StockDWL-7230APContact Us to Buy

 

 

D-Link DWL-7230AP Access Point designed specifically for business-class environments such as large or enterprise corporations, to provide secure and manageable wireless LAN options for network administrators.

The DWL-7230AP is based on the 802.11a/g standards and is backward compatible with 802.11b, ensuring compatibility with a wide range of wireless devices.

For advanced installations, this new high-speed Access Point has an integrated 802.3af Power over Ethernet (PoE) support, allowing installation of this device in areas where power outlets are not readily available.  Since wireless security remains a strong concern among businesses, the DWL-7230AP provides Enhanced Wireless Security Features to ensure your data is protected from hackers. Support for WEP, WPA and WPA2 encryption guarantees the privacy of your network data. Rogue AP detection and containment ensure only the APs you install are able to function on your network.

Default IP Address for D-Link Access Point:

  • DWL-8200AP Default IP address: 192.168.0.50 (Username=admin, no password)
  • DWL-7200AP Default IP address: 192.168.0.50 (Username=admin, no password)
  • DWL-3200AP Default IP address: 192.168.0.50 (Username=admin, no password)
  • DWL-2200AP Default IP address: 192.168.0.50 (Username=admin, no password)
  • DWL-2100AP Default IP address: 192.168.0.50 (Username=admin, no password)
IEEE 802.11b
Standard
IEEE 802.11b
Radio and Modulation Type
DQPSK, DBPSK and CCK
Operating Frequency
2400 - 2497MHz ISM Band
Channel Numbers
11 Channels
Data Rate*
11, 5.5, 2 and 1Mbps
Media Access Protocol
CSMA/CA with ACK
Transmitter Output Power*
Typical 18dBm at 11, 5.5, 2 and 1Mbps
Receiver Sensitivity*
-85dBm for 11Mbps @ 8% PER (Packet Error Rate)
-88dBm @ 5.5Mbps @ 8% PER (Packet Error Rate)
-90dBm for 2Mbps @ 8% PER (Packet Error Rate)
-92dBm @ 1Mbps @ 8% PER (Packet Error Rate)
IEEE 802.11g
Standard
IEEE 802.11g
Radio and Modulation Type
BPSK, QPSK, 16QAM, 64QAM, OFDM
Operating Frequency
2400 - 2483.5MHz ISM Band
Channel Numbers
11 Channels
Data Rate*
54, 48, 36, 24, 18, 12, 9 and 6Mbps
Media Access Protocol
CSMA/CA with ACK
Transmitter Output Power*
+15dBm at 54Mbps
+14 ~ 16dBm at 48Mbps
+17dBm at 36Mbps
+18dBm at 24, 18, 12, 9, and 6Mbps
Receiver Sensitivity*
Typical Sensivity @ which frame (1000-byte PDUs) Error Rate = 10%
-85dBm at 6Mbps
-84dBm at 9Mbps
-82dBm at 12Mbps
-80dBm at 18Mbps
-77dBm at 24Mbps
-73dBm at 36Mbps
-69dBm at 48Mbps
-68dBm at 54Mbps
IEEE 802.11a
Standard
IEEE 802.11a
Radio and Modulation Type
BPSK, QPSK, 16QAM, 64QAM, OFDM
Operating Frequency
5.15 ~ 5.24GHz
5.745 ~ 5.805GHz
Channel Numbers
8 non-overlapping channels
Data Rate*
54, 48, 36, 24, 18, 12, 9 and 6Mbps
Media Access Protocol
CSMA/CA with ACK
Transmitter Output Power*
+12 ~ 15dBm at 54Mbps
+14 ~ 16dBm at 48Mbps
+17 ~ 18dBm at 36Mbps
+18 ~ 19dBm at 24, 18, 12, 9, and 6Mbps
Receiver Sensitivity*
Typical Sensivity @ Which Frame (1000-byte PDUs) Error Rate = 10%
-84dBm at 6Mbps
-83dBm at 9Mbps
-81dBm at 12Mbps
-79dBm at 18Mbps
-76dBm at 24Mbps
-72dBm at 36Mbps
-68dBm at 48Mbps
-67dBm at 54Mbps
General Product Specifications
Interface
Power Jack
Factory Reset Button
10/100Base-TX (UTP)
Wireless Dipole Antenna
External Antenna Type
Dipole antenna with 2dBi gain for 2.4GHz/5GHz
Internal Antenna Type
Printed antenna for 2.4GHz/5GHz
Ethernet Standard
IEEE 802.3, IEEE 802.3u, IEEE 802.3x
LEDs
Power, Speed, Wireless 802.11a & 802.11b/g
Physical Specifications
Dimensions (W x D x H)
7.6 x 5 x 1.3 (193 x 127 x 32mm)
Electrical & Emissions
Operating Voltage
48VDC +/- 10%
Current Consumption
Maximum 6W (8W with PoE)
Safety Agency Certifications & Environmental
Operating Temperature
32F to 104F (0C to +40C)
Non-Operating Temperature
-4F to 149F (-20C to +65C)
Operating Humidity
10% to 90% RH Non-condensing
Non-Operating Humidity
5% to 95%
USA
EMI (802.11a)
FCC Part 15.407 (b) Power limits: FCC Part 15.407 (a)
EMI (802.11g/b)
FCC part 15.247, 15.205, 15.209
Safety
UL 1950-3 CSA mark
Canada
EMI (802.11a)
Power limits: RSS-210 6.2.2 (91)
EMI (802.11g/b)
Power limits: RSS-210 6.2.2 (91)
Safety
CSA-International
Ordering Information
Part Number
Description
DWL-2130AP
xStack Access Point, 802.11g
DWL-2230AP
xStack PoE Access Point, 802.3af, 802.11g
DWL-7130AP
xStack Access Point, 802.11a/g
DWL-7230AP
xStack PoE Access Point, 802.3af, 802.11a/g
DXS-3227
xStack 24-Port Gigabit Wireless-Ready Switch + (4) Combo SFP Ports + (1) Fixed XFP Port + (2) Optional 10-Gig Copper/Fiber Uplinks (AP License Required)
DXS-3227P
xStack 24-Port PoE Gigabit Wireless-Ready Switch + (4) Combo SFP Ports + (1) Fixed XFP Port + (2) Optional 10-Gig Copper/Fiber Uplinks (AP License Required)
DXS-3250
xStack 48-Port Gigabit Wireless-Ready Switch + (4) Combo SFP Ports + (2) Optional 10-Gig Copper/Fiber Uplinks (AP License Required)
DWS-3227
xStack 24-Port Gigabit Unified Wireless Switch + 10 Gigabit Uplinks with 10AP license
DWS-3227P
xStack 24-Port Gigabit Unified Wireless Switch with PoE + 10 Gigabit Uplinks with 10AP license
DWS-3250
xStack 48-Port Gigabit Unified Wireless Switch + 10 Gigabit Uplinks with 10AP license

 

 


     RELATED PRODUCTS


D-Link DWL-2200AP

Wireless Access Point w/ PoE

Transfer Speed of 108Mbps

 

Price: $179.99

Click for More Info.

 

 

D-Link DWL-7200AP+

Tri-Mode Access Point

2.4GHz/5GHz Configuration

 

Price: $249.99

Click for More Info.

 

 

Return Policy | Terms and Conditions | FAQ | About Us | Contact Us



Copyright GNS Wireless LLC., 2014