Wireless Bridge, Wireless Backhaul

Universal Antenna Mount

Provides for Easy Installation for

all Antennas



Coax Sealant included.


 Tech. Support Included


   3 - Year




 54Mbps Outdoor Point-to-Point Backhaul (2 Miles nLOS)

 802.11b/g 2.4GHz Wireless Ethernet Backhaul, Complete



Wireless Bridge Kits, Point to Point Wireless Ethernet Bridge

Mouse over Picture to View Back Panel.


Part#: GNS-1125

Call for Pricing


This Wireless Bridge kit includes Two Outdoor Access Points, as well as 100ft. of cat5 network cable.


Integrated 15db Internal Antenna

Weather Proof Enclosure

Carrier Class QOS with Low Latency

54Mbps Transfer Rate

Integrated PoE Adapter

Dual Ethernet Ports

100ft. of cat5 network cable included

Great for Sharing Internet/Files

Low Latency (Ideal for Video and Voice)


For longer distance, and higher transmit power,

  please view GNS-1137 details.


For shorter distance, please view GNS-1125A.


Technical Specs.




In StockGNS-1125Contact Us to Buy




This Wireless Ethernet Bridge will provide alow latency wireless connection, that will provide a seamless, transparent connection between your two locations.  Low latency is required when VoIP or Video is being streamed across the wireless link.  This Wireless Backhaul operates at 54Mbps aggregated throughput, with a usable throughput of about 25-29Mbps. 


For a low latency connection, total packet delivery time needs to be 100ms or less.  For voice applications, low jitter is also important.  Jitter is the variation in latency, or the difference between the fastest and slowest packet response times.  This wireless Ethernet backhaul, will have both qualities, and assuming your locations have LOS, can connect your two points up to 2 miles apart.  Contact us for more information.


This Outdoor 15db Integrated Wi Fi Access Point can be mounted outdoors, and can be powered through the integrated Power-over-Ethernet adapter that comes with the unit.  This means that this access point can be placed up to 300ft. away from your network, with only a single cat5 cable connecting to it.  This makes your network Installation easier to install and maintain. Each Access Point will be configured as a Bridge, and will only communicate with each other.  This means a safer, and more secure network connection for your LAN.


Log into the outdoor unit via a cat5 cable, configure the settings to best suit your network, and your ready for installation.  Simply mount the enclosure outside in the direction of your remote location, connect the cat5 network cable to your LAN, and you're ready for connectivity.


Please note that this Wireless Bridge requires your two locations to have Line of Sight.  For more information, or to discuss your particular situation, please contact us anytime.  To see other Wireless Bridge packages that do not require Line of Sight, Click Here.


VLAN Trunking:  Typically a switch uses port based VLANs.  This means that whatever is plugged in to Port X, belongs to whatever Port X is in.  Each frame is tagged with a VLAN tag in the layer 2 header when entering a VLAN switch port.  These frames run across trunk links between two switches and between a switch and a router.  The tag is stripped down when the frame is sent from the outgoing switch port to the end device.  Remember that the native VLAN frames (by default VLAN 1 in Cisco and many other devices) are NOT tagged.


When you use a radio link, or wireless bridge on a VLAN trunk, there are some things to remember:

  • You must use a transparent bridge or the trunk will be unable to form.  Remember, L2.5 bridging rewrites the layer 2 header.  (This bridge operates as a transparent bridge, when in bridge mode)

  • The radios included in this wireless bridge (and many other wireless devices) are not switches and are not VLAN aware.  Therefore, tagged frames in the trunk will be ignored by the devices.

  • The VLAN tag is 4 bytes long.  This means that the maximum Ethernet frame size goes from 1518 bytes to 1522 bytes.  Any devices on the trunk link needs to be able to pass these frames.  This Wireless Bridge, with up to date firmware can pass VLAN tagged frames.


Wireless Bridge, PTP

For additional protection from surges, or other surge induced electricity that

may travel through the Ethernet cable, please use the CMJ8-POE

Surge Protector.



Price: $62.99


Click for More Info.



Features at a glance

  • Dual Ethernet Ports:  This will allow you to daisy chain radios at your installation sites.  This can benefit you as an installer, as the dual Ethernet ports will allow you to plug in PoE devices such as network cameras or other Outdoor Access Points.

  • More Robost Routing Features:  Includes Tunneling Protocol Support, which will allow you to pass through VPN clients, as well as use tunneling protocols such as VPN, PPTP, RSA and others.

  • All New Access Point Features:  WDS will allow this Outdoor Access Point to be wirelessly connected to other Access Points, while still servicing clients.  (Wireless Distribution System)

  • Wi-Fi Protected Access (WPA):  Wireless Protected Access impoves on the security features of WEP.  It includes improved data encryption and user authentication.

  • All New Client Adapter Features:  With this Outdoor Access Point, you will be able to align your client and point-to-point installations without having to log into the radio.  You will get visual signal strength at a glance by using this great new feature, using the alignment LED's located on the back of the Access Point.

  • Controllable High Gain Output:  Both radios have 13dBm maximum output.  This works great for long distance Point-to-Point applications, as well as Client applications.  Power can be scaled back for closer installations to avoid noise issues and to meet local regulatory requirements.

  • Wireless Security:  WEP, WPA wireless security is included in this wireless backhaul.  This will encrypt the data being sent between the connection.  Also included in this wireless backhaul is AES encryption, which is a higher level security feature then standard WEP/WPA.  The two radios can also be configured in PXP mode, which enables only the two outdoor access points to communicate with each other, avoiding any other access to the network.  The wireless bridge operates seamlessly as a Wireless Bridge between your two locations.

  • Wireless Interference:  This wireless Ethernet Bridge is operating at 2.4GHz.  This means that if you have a high number of 802.11b/g nodes around your two locations, it is possible that you will experience interference.  This can result in poor point to point wireless performance, dropped packets, slow connection, and high latency.  To avoid the Interference of other 802.11b/g radios, move to a 802.11a, 5GHz point to point wireless bridge.  Click here for an 802.11a wireless bridge.


Technical Specs.

Standard IEEE 802.11b/g Wi-Fi
Data Rates Supported 1, 2, 5.5 and 11, 54Mbps
LAN Interface 10/100BaseT Ethernet
Frequency Band 2.4GHz
Radio Mode Access Point / Point-to-Point / CPE
Communication Method Half Duplex
Transmit Power +13dBm Maximum
Operating Channels 11 FCC
Non-overlapping Channels 3
Receive Sensitivity -73dBm @ 54Mbps, -85dBm @ 6Mbps
Range Up to 2+ miles Point-to-Point
Polarization Horizontal or Vertical
Antenna Beamwidth 9 Degree Horizontal, 8 Degree Vertical
Encryption 40-bit & 128-bit WEP, MAC filter, WPA, AES Security
Remote Configuration Support Based on IP Address
Dimension (L x W) "13 x 10 radio only"
Unit Weight 0.55 kg (2.09 lbs)
Environmental Operating Temperature -65 deg C  to +60 deg C
Mounting Pole or wall mount via 2 pc U-Bolts & clamps (included)
Power Consumption 350 mA at 12V DC
Cable 100 meter maximum cat5 cable

Specifications are subject to change without notice.

Subject to local regulations.



In StockGNS-1125Contact Us to Buy




Real Time Signal Strength Meter:

Once the Wireless Link is established between your two locations, you will be able to log into the web interface of the AP and view real time noise and signal strength levels.  This will allow you to adjust the antennas accordingly and make any necessary changes required in order for your wireless link to operate at its fullest potential.

The image to the right is an example of the Noise and Signal levels that will allow you to monitor the Wireless Bridge.

SNR = Noise (dBm) - Signal (dBm)

Signal to Noise ratio, Wireless signal strength, gnswireless.com

 View Point to Point Wireless Installation Diagram Below:

NOTE: Linksys routers and universal antenna mounts are for illustration purposes only and are not included in the bridge package.

Please Note: The wireless bridge kits listed on this page may also be referred to as 802.11 bridge  802.11 Ethernet bridge, 802.11g wireless bridge, belkin wireless bridge, d link wireless bridge , dlink wifi repeater, dlink wireless bridge, Ethernet bridge router, how to wireless bridge, internet wireless bridge, Linksys point to point wireless , Linksys wifi bridge, Linksys wifi repeater, long range wifi bridge, long range wireless Ethernet bridge, netgear network bridge, netgear wireless bridge, netgear wireless network bridge, outdoor access point bridge, outdoor Ethernet bridge, outdoor wifi bridge, outdoor wireless access point, outdoor wireless bridges, outdoor wireless Ethernet bridge, outdoor wireless point to point, point to multipoint bridge, point to point Ethernet bridge, point to point network connection, point to point router, point to point wifi bridge, point to point wireless bridging, point to point wireless connection, point to point wireless Ethernet, point to point wireless internet, point to point wireless networks, secure wireless bridge, set up wireless bridge, setting up wireless bridge, wifi bridge router, wifi client bridge, wireless access point bridge, wireless bridge access point, wireless bridge antenna, wireless bridge connection, wireless bridge kits, wireless bridge point to multipoint, wireless bridge router, wireless bridge setup, wireless bridge wds, wireless lan bridge, wireless network bridge Ethernet, wireless network bridge, wireless networking bridge, wireless repeater bridge, wireless to wireless bridge, 5GHz point to point wireless backhaul, T1 replacement wireless bridge, T1 point to point, Fiber wireless backhaul.




Universal Antenna Mount

Easy Installation for all Antennas


Part#: GNS-1433

Price: $27.99





Click for More Info.



3 foot Antenna Tripod

Requires min. 5ft. Mast


Part#: GNS-1631

Price: $44.99




Click for More Info.


12" Wall Mount Bracket

Great for when eve of build-

ing is in the way of antenna.


Part#: GNS-1633

Price: $22.99



Click for More Info.




Ask us about pre-configuration of these Access Points, so they work "out of the box" and ready to install at your two locations.  




Return Policy | Terms and Conditions | FAQ | About Us | Contact Us

Copyright GNS Wireless LLC., 2014

All Major Cards Accepted