Universal Antenna Mount

Provides for Easy Installation for

all Antennas



Coax Sealant included.


Infrared Network Camera

Easily connects to your existing

PTP Wireless Ethernet Link

Click for more information



 Tech. Support Included


   3 - Year




900Mhz Wireless Ethernet Bridge
900Mhz Point to Point Wireless Ethernet Bridge.  Up to 11Mbps Aggregate data rate.  23dBm transmit power with adjustable output for closer installations.  Integrated 11dBi panel antenna.  Includes WEP/WPA/WPA2 Security, Power over Ethernet - Complete Link - 1/4 to 1/2 Mile NLOS



Mouse over Picture to View Back Panel.

Part#: GNS-1130

Call for Pricing


This Wireless Bridge kit includes Two Outdoor NLOS Access Points, as well as 100ft. of cat5 network cable, Power Supply and Mounting Kit.


Integrated 11db 900MHz Antenna

Weather Proof Enclosure

Carrier Class QOS with Low Latency

11Mbps Transfer Rate at 900MHz

Integrated PoE Adapter included

True NLOS bridging Solution.

100ft. of cat5 network cable included

Perfect Solution for tree penetration


Technical Specs.


Ask us about Pre-Configuration...so your unit

   works right out of the box.



Call for availabilityGNS-1130Contact Us to Buy





Trees or other obstructions in the way?

900MHz Wireless Backhauls are powerful when used appropriately.  900MHz has great penetration for Non-Line of sight applications, however they are very vulnerable to interference from other devices (cordless phones, remote controls).  It is recommended to mount the antennas as high as possible on both your locations, and determine if any other hand held transmitting devices are present before Wi-Fi installation.


This Outdoor 11db Integrated Access Point can be mounted outdoors, and can be powered through the integrated Power-over-Ethernet adapter that comes with the unit.  If you are looking to connect multiple locations, but have obstructions such as trees in the way, then this bridge kit is the ideal solution.  The outdoor antenna needs only a single Ethernet Cable connected to it, making your installation fast and easy.  Bridge your wireless network together up to 1 mile away, and gain access to sharing files, videos, or other data.


The 900MHz access point can be placed up to 300ft. away from your network, with only a single cat5 cable connecting to it.  This makes your network Installation easier to install and maintain. Each Access Point will be configured as a Bridge, and will only communicate with each other.  This means a safer, and more secure network connection for your LAN.  No other rogue laptop user will be able to pick up the signal between your two points.


This Wireless Bridge is connecting at a frequency of 900MHz, which means if you have trees or other obstacles in the path of your Point-to-Point connection, you will still have a strong and solid connection.  Simply mount the enclosure outside in the direction of your remote location, connect the cat5 network cable to your LAN, and you're ready for connectivity.  This bridge includes security measures of 40 and 128bit WEP, Media Access Control, and WPA.


VLAN Trunking:  Typically a switch uses port based VLANs.  This means that whatever is plugged in to Port X, belongs to whatever Port X is in.  Each frame is tagged with a VLAN tag in the layer 2 header when entering a VLAN switch port.  These frames run across trunk links between two switches and between a switch and a router.  The tag is stripped down when the frame is sent from the outgoing switch port to the end device.  Remember that the native VLAN frames (by default VLAN 1 in Cisco and many other devices) are NOT tagged.


When you use a radio link, or wireless bridge on a VLAN trunk, there are some things to remember:

  • You must use a transparent bridge or the trunk will be unable to form.  Remember, L2.5 bridging rewrites the layer 2 header.  (This bridge operates as a transparent bridge, when in bridge mode)

  • The radios included in this wireless bridge (and many other wireless devices) are not switches and are not VLAN aware.  Therefore, tagged frames in the trunk will be ignored by the devices.

  • The VLAN tag is 4 bytes long.  This means that the maximum Ethernet frame size goes from 1518 bytes to 1522 bytes.  Any devices on the trunk link needs to be able to pass these frames.  This Wireless Bridge, with up to date firmware can pass VLAN tagged frames.



Features at a glance

  • Dual Ethernet Ports:  This will allow you to daisy chain radios at your installation sites.  This can benefit you as an installer, as the dual Ethernet ports will allow you to plug in PoE devices such as network cameras or other Outdoor Access Points.

  • More Robost Routing Features:  Includes Tunneling Protocol Support, which will allow you to pass through VPN clients, as well as use tunneling protocols such as VPN, PPTP, RSA and others.

  • All New Access Point Features:  WDS will allow this Outdoor Access Point to be wirelessly connected to other Access Points, while still servicing clients.  (Wireless Distribution System)

  • Wi-Fi Protected Access (WPA):  Wireless Protected Access impoves on the security features of WEP.  It includes impoved data encryption and user authentication.

  • All New Client Adapter Features:  With this Outdoor Access Point, you will be able to align your client and point-to-point installations without having to log into the radio.  You will get visual signal strength at a glance by using this great new feature, using the alignment LED's located on the back of the Access Point.

  • Controllable High Gain Output:  Both radios have 25dBm maximum output.  This works great for long distance Point-to-Point applications, as well as Client applications.  Power can be scaled back for closer installations to avoid noise issues and to meet local regulatory requirements.

  • Wireless Security:  WEP, WPA wireless security is included in this wireless backhaul.  This will encrypt the data being sent between the connection.  Also included in this wireless backhaul is AES encryption, which is a higher level security feature then standard WEP/WPA.  The two radios can also be configured in PXP mode, which enables only the two outdoor access points to communicate with each other, avoiding any other access to the network.  The wireless bridge operates seamlessly as a Wireless Bridge between your two locations.

For additional protection from surges, or other surge induced electricity that

may travel through the Ethernet cable, please use the CMJ8-POE

Surge Protector.



Price: $62.99


Click for More Info.




Access Point Specifications
Data Rates Supported 1, 2, 5.5, 11, 54Mbps
LAN Interface 10/100 BaseT Ethernet
Frequency Band 900MHz
Radio Mode Access Point / Point-to-Point / CPE
Communication Method Half Duplex
Transmit Power +25dBm Maximum
Receive Sensitivity -72dBm @ 54Mbps, -92dBm @ 6Mbps
Range Up to 1+ miles Point-to-Point (Longer Distance with LOS)
Encryption 40-bit & 128-bit WEP, MAC filter, WPA, AES Encryption
Remote Configuration Support Based on IP Address
Dimension (L x W) "16 x 14 radio only"
Unit Weight 0.55 kg (4 lbs)
Environmental Operating Temperature -65 deg C  to +60 deg C
Mounting Pole or wall mount via 2 pc U-Bolts & clamps (included)
Power Consumption 350 mA at 12V DC.  Power Supply included is 18V.
Cable 100 meter maximum cat5 cable


Specifications are subject to change without notice.

Subject to local regulations.


In StockGNS-1130Contact Us to Buy





 View Point to Point Wireless Installation Diagram Below:

NOTE: Linksys routers and universal antenna mounts are for illustration purposes only and are not included in the bridge package.


Please Note: The wireless bridge kits listed on this page may also be referred to as 802.11 bridge  802.11 Ethernet bridge, 802.11g wireless bridge, belkin wireless bridge, d link wireless bridge , dlink wifi repeater, dlink wireless bridge, Ethernet bridge router,how to wireless bridge, internet wireless bridge, Linksys point to point wireless , Linksys wifi bridge, Linksys wifi repeater, long range wifi bridge, long range wireless Ethernet bridge, netgear network bridge, netgear wireless bridge, netgear wireless network bridge, outdoor access point bridge, outdoor Ethernet bridge, outdoor wifi bridge, outdoor wireless access point, outdoor wireless bridges, outdoor wireless Ethernet bridge, outdoor wireless point to point, point to multipoint bridge, point to point Ethernet bridge, point to point network connection, point to point router, point to point wifi bridge, point to point wireless bridging, point to point wireless connection, point to point wireless Ethernet, point to point wireless internet, point to point wireless networks, secure wireless bridge, set up wireless bridge, setting up wireless bridge, wifi bridge router, wifi client bridge, wireless access point bridge, wireless bridge access point, wireless bridge antenna, wireless bridge connection, wireless bridge kits, wireless bridge point to multipoint, wireless bridge router, wireless bridge setup, wireless bridge wds, wireless lan bridge, wireless network bridge Ethernet, wireless network bridge, wireless networking bridge, wireless repeater bridge, wireless to wireless bridge, 5GHz point to point wireless backhaul, T1 replacement wireless bridge, T1 point to point, Fiber wireless backhaul, 900MHz non line of sight wireless, non-line of site point to point, tree penetrating wifi antenna





Hello.  I have a customer that wants a camera at his gate.  From his house to the gate it is 1,200 feet.  About the middle of the path there is about 100' of trees.  He wants it to be wireless.  We have power at the gate.  What would be the best option for this application and could I please get a quote?


You will have to use a 900 MHz point to point link, which will penetrate the trees without a problem.  Your quote is attached.  This includes everything that you need to establish the connection, and will come pre-configured, and ready to install "out of the box".  Each antenna that will be placed at each location is enclosed in an outdoor, weatherproof enclosure.  At the main location, you will connect the outdoor radio, via Ethernet cable, to your LAN, or switch.  At the gate, you will connect the outdoor radio, via Ethernet cable to the camera.  Each unit is powered via a power injector, which must be placed indoors, or inside a weatherproof box where you have your AC power.


You can view details of the link here:  http://www.gnswireless.com/GNS1130_900MHz.htm                                                                          




I need to know if it is possible to network two home offices together via wireless. They are approximately 3300 feet apart. The ground topography between the two shows a dip so there will be no land mass obstruction between the locations.  The only obstructions are trees. Patches of trees throughout total approximately 1020 linear feet of obstruction. The desired result is for the two home offices to be connected as if they were one. Each home office has a basic network where all the computers are on the same workgroup. One home office has three computers and the other one has four. Each site has wireless routers where other users may be on the network occasionally. We would like to share files, printers, and internet. We plan to share large files but connection speeds at 11Mbps are acceptable. Is there anything powerful enough to make this connection with 100% certainty?



At your distance, the most reliable wireless bridge to connect your two locations would be to use the GNS-1130, which is a complete link, using the 900 MHz technology.  The radios included in the link, are outdoor rated, and can be mounted outdoors.  The integrated antennas will point toward each other, and establish the desired link.  Each radio is powered via an indoor power injector, which sends power and data through the connected Ethernet cable.  This makes installation quick and easy.  Mount each antenna as high as possible, at your locations, and point toward each other.  Avoid using any 900 MHz cordless phones inside the two locations.  View details of the link by clicking here: http://www.gnswireless.com/GNS1130_900MHz.htm




Universal Antenna Mount

Easy Installation for all Antennas


Part#: GNS-1433

Price: $27.99





Click for More Info.



3 foot Antenna Tripod

Requires min. 5ft. Mast


Part#: GNS-1631

Price: $44.99




Click for More Info.


12" Wall Mount Bracket

Great for when eve of build-

ing is in the way of antenna.


Part#: GNS-1633

Price: $22.99



Click for More Info.




Ask us about pre-configuration of these Access Points, so they work "out of the box" and ready to install at your two locations.  




Return Policy | Terms and Conditions | FAQ | About Us | Contact Us

Copyright GNS Wireless LLC., 2014

All Major Cards Accepted