Universal Antenna Mount

Provides for Easy Installation for

all Wi Fi Antennas


3ft. Tripod + 5ft. Mast Combo

Provides for Easy Installation for

roof mounting Antennas.


Infrared Network Camera

Easily connects to your existing

PTP Wireless Ethernet Link

Click for more information



900Mhz Wireless Ethernet Bridge
900Mhz Point to Point Wireless Ethernet Bridge.  Up to 11Mbps Aggregate data rate.  23dBm transmit power with adjustable output for closer installations.  External 14dBi yagi antenna.  Includes WEP/WPA/WPA2 Security, Power over Ethernet - Complete Link - 1/4 to 1/2 Mile NLOS



Mouse over Picture to View Back Panel.


Part#: GNS-1135

Call for Pricing


This Wireless Bridge kit includes Two Outdoor 900MHz Access Points, 14dBi Yagi Antennas, as well as 100ft. of cat5 network cable, Power Supply and Mounting Kit.


External 14dBi Yagi Antenna

5ft. Coax cable to connect Antenna to AP

Outdoor Weather Proof Enclosure

Carrier Class QOS with Low Latency

11Mbps Transfer Rate at 900MHz

Integrated PoE Adapter included

Non Line of Sight  Bridging Solution.

100ft. of cat5 network cable included

Perfect for NLOS Backhaul


Technical Specs.


Ask us about Pre-Configuration...so your unit works right out of the box.


900MHz Wireless Ethernet Bridge (Tree Penetrating)


Call for availabilityGNS-1135Contact Us to Buy





Great for NLOS Wireless Solutions through trees.

900MHz Wireless Backhauls are powerful when used appropriately.  900MHz has great penetration for Non-Line of sight applications, however they are very vulnerable to interference from other devices (cordless phones, remote controls).  It is recommended to mount the antennas as high as possible on both your locations, and determine if any other hand held transmitting devices are present before install.



This Outdoor Access Point can be mounted outdoors, and connected directly to the outdoor 14dBi Yagi Antenna for maximum Wireless Range.  This unit can be powered through the integrated Power-over-Ethernet adapter that comes with the unit.  If you are looking to connect multiple locations without clear, unobstructed line of sight, then this solution will work for you.  When trees or other obstructions such as small homes or buildings are in between your two points, the GNS-1135 is the solution. 


The 900MHz Outdoor Access Point can be placed up to 300ft. away from your network, with only a single cat5 cable connecting to it.  This makes your network Installation easier to install and maintain. Each Outdoor Access Point will be configured as a Point to Point Bridge, and will only communicate with each other.  These units can be configured with AES encryption for maximum security.  This means a safer, and more secure network connection for your LAN.


This Wireless Bridge is connecting at a frequency of 900MHz, which means if you have large trees or other obstacles in the path of your Point-to-Point connection, you will still have a strong and solid wireless connection.  Simply mount the enclosure outside in the direction of your remote location, mount the yagi antenna, connect the cat5 network cable to your LAN, and you're ready for connectivity.  This bridge includes security measures of 40 and 128bit  Access Control, and WPA.


For additional protection from surges, or other surge induced electricity that

may travel through the Ethernet cable, please use the 300SS surge protector.


Indoor/Outdoor Canopy Surge Protector


Part#: 300SSB

Price: $32.99


Please do not use this bridge kit if you are close to a High Gain Cellular Tower, or near any govt. agencies such as Fire Department, Police Station, or Ambulance Center, as your signal will have a large degree of interference. Contact us for more details, or view the GNS-1134 for replacement.

Features at a glance

  • Dual Ethernet Ports:  This will allow you to daisy chain radios at your installation sites.  This can benefit you as an installer, as the dual Ethernet ports will allow you to plug in PoE devices such as network cameras or other Outdoor Access Points.

  • More Robost Routing Features:  Includes Tunneling Protocol Support, which will allow you to pass through VPN clients, as well as use tunneling protocols such as VPN, PPTP, RSA and others.

  • All New Access Point Features:  WDS will allow this Outdoor Access Point to be wirelessly connected to other Access Points, while still servicing clients.  (Wireless Distribution System)

  • Wi-Fi Protected Access (WPA):  Wireless Protected Access impoves on the security features of WEP.  It includes improved data encryption and user authentication.  AES encyption is available over your point to point wireless bridge. 

  • All New Client Adapter Features:  With this Outdoor Access Point, you will be able to align your client and point-to-point installations without having to log into the radio.  You will get visual signal strength at a glance by using this great new feature, using the alignment LED's located on the back of the Access Point.

  • Controllable High Gain Output:  Both radios have 23dBm maximum output.  This works great for long distance Point-to-Point applications, as well as Client applications.  Power can be scaled back for closer installations to avoid noise issues and to meet local regulatory requirements.

  • Real Time Throughput Speed: While the throughput speed is operating at the 802.11 54Mbps speed, the real time throughput will vary depending on what types of obstructions you are attempting to penetrate, and how far apart your antennas are.  Call for more information.

  • Wi Fi Wireless Security:  WEP, WPA wireless security is included in this wireless backhaul.  This will encrypt the data being sent between the connection.  Also included in this wireless backhaul is AES encryption, which is a higher level security feature then standard WEP/WPA.  The two radios can also be configured in PXP mode, which enables only the two outdoor access points to communicate with each other, avoiding any other access to the network.  The wireless bridge operates seamlessly as a Wireless Bridge between your two locations.


Access Point Specifications
Data Rates Supported 1, 2, 5.5, 11, 54Mbps
LAN Interface 10/100 BaseT Ethernet
Frequency Band 900MHz
Radio Mode Access Point / Point-to-Point / CPE
Communication Method Half Duplex
Transmit Power +29dBm Maximum
Receive Sensitivity -72dBm @ 54Mbps, -92dBm @ 6Mbps
Range Up to 2+ miles Point-to-Point
Encryption 40-bit & 128-bit WEP, MAC filter, WPA, AES Encryption
Remote Configuration Support Based on IP Address
Dimension (L x W) "13 x 10 radio only"
Unit Weight 0.55 kg (4 lbs)
Environmental Operating Temperature -65 deg C  to +60 deg C
Mounting Pole or wall mount via 2 pc U-Bolts & clamps (included)
Power Consumption 350 mA at 12V DC.  Power Supply included is 18V.
Cable 100 meter maximum cat5 cable

Specifications are subject to change without notice.

Subject to local regulations.


Antenna Specifications
Frequency Range: 890 - 960MHz
Transmit Gain: 14 dBi (typical)
Max. Input Power: 150W
Polarization: Vert/Hori.
AZ/EL Beamwidth: 30 Vertical 32 Horizontal
Front to Back Ratio: 16 dB (min)
VSWR: ≤1.4
Wind Load: 210 km/h
Length: 1130mm
Weight: 2.35kg
Mounting Kit: Mast
Operating Temperature: -40C to 70C
Material: Aluminum Alloy
Additional Features: Powder Coated

Please Note: The wireless bridge kits listed on this page may also be referred to as 802.11 bridge  802.11 Ethernet bridge, 802.11g wireless bridge, belkin wireless bridge, d link wireless bridge , dlink wifi repeater, dlink wireless bridge, Ethernet bridge router, how to wireless bridge, internet wireless bridge, Linksys point to point wireless , Linksys wifi bridge, Linksys wifi repeater, long range wifi bridge, long range wireless Ethernet bridge, netgear network bridge, netgear wireless bridge, netgear wireless network bridge, outdoor access point bridge, outdoor Ethernet bridge, outdoor wifi bridge, outdoor wireless access point, outdoor wireless bridges, outdoor wireless Ethernet bridge, outdoor wireless point to point, point to multipoint bridge, point to point Ethernet bridge, point to point network connection, point to point router, point to point wifi bridge, point to point wireless bridging, point to point wireless connection, point to point wireless Ethernet, point to point wireless internet, point to point wireless networks, secure wireless bridge, set up wireless bridge, setting up wireless bridge, wifi bridge router, wifi client bridge, wireless access point bridge, wireless bridge access point, wireless bridge antenna, wireless bridge connection, wireless bridge kits, wireless bridge point to multipoint, wireless bridge router, wireless bridge setup, wireless bridge wds, wireless lan bridge, wireless network bridge Ethernet, wireless network bridge, wireless networking bridge, wireless repeater bridge, wireless to wireless bridge, 5GHz point to point wireless backhaul, T1 replacement wireless bridge, T1 point to point, Fiber wireless backhaul, 900MHz non line of sight wireless, non-line of site point to point, tree penetrating wifi antenna


In StockGNS-1135Contact Us to Buy




Pre-Fabricated Cat5

All Lengths available




Click for More Info.




5ft. Antenna Mast

1 1/4 Diameter Grey

16 Gauge


Part#: GNS-1634

Price: $14.99



Click for More Info.



3 foot Antenna Tripod

Requires min. 5ft. Mast


Part#: GNS-1631

Price: $44.99




Click for More Info.



Return Policy | Terms and Conditions | FAQ | About Us | Contact Us

Copyright GNS Wireless LLC., 2014