UM, Universal Antenna Mount

Universal Antenna Mount

Provides for Easy Installation for

all Wi-Fi Antennas



Coax Seal

Coax Sealant is included.



Universal Antenna Mount

Provides for Easy Installation for

all Wi-Fi Antennas


802.11N Point to Point Wireless Bridge

90Mbps Point to Point Wireless Bridge.  1/2 Mile range with unobstructed line of sight.  5.4-5.8GHz, 802.11A, 802.11N Wireless Ethernet Bridge -  Complete fixed wireless broadband.  802.11N speeds.


 90Mbps Outdoor Point-to-Point Wireless Ethernet Bridge

 802.11A/N 5.4-5.8GHz Wireless Ethernet Bridge - Complete Link



90Mbps Point to Point Wireless Bridge.  1/2 Mile range with unobstructed line of sight.  5.4-5.8GHz, 802.11A, 802.11N Wireless Ethernet Bridge -  Complete












Part#: GNS-1150N



Integrated 18dBi patch antenna

Outdoor Weather Proof Enclosure

Atheros Chipsets

90Mbps Throughput

WEP, WPA, WPA2 Support

Pole mounting hardware included

26dBm output power


Whats included in this point to point link:

2x Outdoor Integrated Radio
2x Power over Ethernet Injector (PoE)
2x Power Supply
2x 50ft. Sheilded cat5e Ethernet Cable
2x Mount Hardware for 1-1.5" OD mast

Pre-configured for "out of the box"  


External signa/alignmentl LED's

WEP/WPA/WPA2 (TKIP/AES) Encryption

1 Year Warranty includes Tech Support








In StockGNS-1150NContact Us to Buy




Outdoor Access Points = Ease of Installation


wireless bridge comes ready to install "out of the box".


Basic Description:

This Point to Point Wireless Bridge includes a pair of outdoor access points, that have an integrated 18dBi directional patch antenna built into the enclosure.  This means that only a single, small enclosure is required at each location.  Once the AP's are installed at each location, the Wireless Bridge operates as a transparent bridge, and will pass all network traffic between your two locations.  The Wireless Bridge operates similar to an invisible Ethernet cable connecting your two locations.  Each antenna has a beam width of about 25, so aligning the antennas is easy.  Furthermore, you will have the ability to view real time signal strength, link quality, and noise level, using the web based configuration.  Each AP has a static IP address, used strictly for web based configuration, and troubleshooting.



Connection to Network:

To connect the access point to your network at each location, a single Cat5 Ethernet cable is used.  A 25ft. shielded Cat5 cable is included for each location.  (If you need more cable, a maximum length of up to 250ft. can be used)  The Cat5 Ethernet cable connects directly from the outdoor access point using a weatherproof grommet,  to an indoor POE (Power-over-Ethernet) injector.  The POE injector plugs into a standard AC outlet for power, and another Cat5 Ethernet cable connects from the POE injector to your network (Router/PC/Switch etc.)

At the MAIN location, you will typically connect to an open LAN port on the back of your existing router, or switch.  At the REMOTE location, you can connect either directly to a PC if you only have a single computer, or you can connect to an indoor wired/wireless router.  This will allow you to run multiple computers over the wireless bridge.  See Diagram below.


Maximum Range & Interference:

With clear, un-obstructed line of sight between your two locations, a maximum range of 1/2 mile can be achieved using this link.  Please note that this Point to Point Wireless Bridge operates between 5.4-5.8GHz.  If you plan on installing more then one link at the same location, you want to avoid interference between each Point to Point link by using separate channels such as CH. 60 (5.3GHz) and CH. 149 (5.7GHz). Mount the outdoor access points as high as possible to further avoid any other 5GHz interference.


Each access point has scalable output power.  Power can be scaled back for closer installations to avoid noise issues and to meet local regulatory requirements.  This Wireless Bridge is connecting at a frequency above 5GHz, which means if you have trees or other obstacles in the path of your Point-to-Point connection, you will still have a strong and solid connection at short range.  Simply mount the enclosure outside in the direction of your remote location, connect the cat5 network cable to your LAN, and you're ready for connectivity.


Security Features:

This Wireless Point to Point bridge operates as a transparent bridge.  It is similar to an invisible Ethernet cable connecting your two locations.  It includes multiple security options including WEP/WPA/WPA2.  It also has ability to enable MAC address authentication so that only the two access points are able communicate.  You can hide the network SSID, and because the beam width of the antennas is directional, (about 25) the signal is not being broadcasted in all directions, only in the direction you aim the outdoor antenna. 


If you have any other questions, please contact our Pre-Sales/Technical Support Dept. at (516) 214-0321.




Point to Point wireless video

Share internet connection between 2 buildings

VoIP Applications

Wireless video camera link

Share data


This Wi-Fi Bridge package includes everything you need to get your two remote locations connected in minutes.  The Wi-Fi Antenna and radio is built into a weatherproof enclosure, allowing you to mount the radio outdoors, connected with only a single cat5 Ethernet Cable.


If you are mounting the radio's to a flat surface, such as the side of a home or building, it is recommended that you use the GNS-1433, Universal Antenna Mount.  Click here for more info.




For additional protection from surges, or other surge induced electricity that

may travel through the Ethernet cable, please use the 300SS surge protector.


Indoor/Outdoor Canopy Surge Protector


Part#: 300SSB

Price: $32.99



Technical Specifications
Processor Atheros AR7130 (300MHz)
System Memory 32MB or 64MB DDR SDRAM
NOR Flash 8 MB
Surge Arrestor Supported
Watch Dog Timer Yes
Certificate FCC, CE
RoHS compliance Yes
Connector RJ-45 All Weather
Power consumption 12V/2A ~ 24V/1A DC
POE Passive 48V POE
Reset Button Power Reset
Reset to Factory Default
LED Power, Ethernet, Wireless
Operating Temperature -58F to +158F
Operating Humidity 5 ~ 95%

Antenna Specifications
Frequency Range 5400MHz ~ 5900MHz
V.S.W.R. =1.5
Return Loss =-20db
Antenna Type Unidirectional Antenna
Gain 18dBi
Polarization Vertical and Horizontal
Maximum Power 50W
AZ/EL Beamwidth 25/32
Impedance 50 Ohm
Inside Connector MMCX Male * 2
Wind Survival < 150 MPH
Radome Material ABS + PC
Mounting Pole Mount
RoHS Complaint Yes
Dimension 9.0 x 9.0 x 2.8 inches
Weight 7 lbs

Radio Specifications
Chipset Atheros AR9220
Host Interface PCI Interface v2.3 (Type III-A Mini PCI form factor)
Power Consumption 7W
Antenna Connector 2 x MMCX
Data Rate IEEE 802.11N:

20MHz   1Nss: 65Mbps@800GI, 72.2Mbps@400GI(Max.)
              2Nss: 130Mbps@800GI, 144.4Mbps@400GI(Max.)

40MHz  1Nss: 135Mbps@800GI, 150Mbps@400GI(Max.)           

             2Nss: 270Mbps@800GI, 300Mbps@400GI(Max.)

Frequency Range IEEE 802.11a/n: (US & Canada)
5.150 ~ 5.350GHz, 5.470 ~ 5.725GHz, 5.725 ~ 5.850GHz (Europe)
5.150 ~ 5.350GHz, 5.470 ~ 5.725GHz, 5.725 ~ 5.875GHz (Japan)
5.150 ~ 5.250GHz, 5.250 ~ 5.350GHz, 5.470 ~ 5.725GHz
Modulation OFDM: BPSK, QPSK, 16QAM, 64QAM
Certificate FCC, CE
RoHS Compliance Yes





 View Point to Point Wireless Installation Diagram Below:

802.11N Wireless Bridge Diagram, 802.11N PTP Link Example

Please Note: The wireless bridge kits listed on this page may also be referred to as 802.11 bridge  802.11 Ethernet bridge, 802.11g wireless bridge, belkin wireless bridge, d link wireless bridge , dlink wifi repeater, dlink wireless bridge, Ethernet bridge router, how to wireless bridge, internet wireless bridge, Linksys point to point wireless , Linksys wifi bridge, Linksys wifi repeater, long range wifi bridge, long range wireless Ethernet bridge, netgear network bridge, netgear wireless bridge, netgear wireless network bridge, outdoor access point bridge, outdoor Ethernet bridge, outdoor wifi bridge, outdoor wireless access point, outdoor wireless bridges, outdoor wireless Ethernet bridge, outdoor wireless point to point, point to multipoint bridge, point to point Ethernet bridge, point to point network connection, point to point router, point to point wifi bridge, point to point wireless bridging, point to point wireless connection, point to point wireless Ethernet, point to point wireless internet, point to point wireless networks, secure wireless bridge, set up wireless bridge, setting up wireless bridge, wifi bridge router, wifi client bridge, wireless access point bridge, wireless bridge access point, wireless bridge antenna, wireless bridge connection, wireless bridge kits, wireless bridge point to multipoint, wireless bridge router, wireless bridge setup, wireless bridge wds, wireless lan bridge, wireless network bridge Ethernet, wireless network bridge, wireless networking bridge, wireless repeater bridge, wireless to wireless bridge, 5GHz point to point wireless backhaul, T1 replacement wireless bridge, T1 point to point, Fiber wireless backhaul, 802.11N Point to Point Link, MIMO Outdoor Wireless Router, MIMO Antenna, High Speed Wireless.


Universal Antenna Mount

Easy Installation for all Antennas


Part#: GNS-1433

Price: $27.99





Click for More Info.



3 foot Antenna Tripod

Requires min. 5ft. Mast


Part#: GNS-1631

Price: $44.99




Click for More Info.


12" Wall Mount Bracket

Great for when eve of build-

ing is in the way of antenna.


Part#: GNS-1633

Price: $22.99



Click for More Info.




Ask us about pre-configuration of these Access Points, so they work "out of the box" and ready to install at your two locations.  




Return Policy | Terms and Conditions | FAQ | About Us | Contact Us

Copyright GNS Wireless LLC., 2014

All Major Cards Accepted