Universal Antenna Mount

Provides for Easy Installation for

all Wi-Fi Antennas

 

 

Coax Sealant is included.

 

Universal Antenna Mount

Provides for Easy Installation for

all Wi-Fi Antennas

 

 

 54Mbps Outdoor Point-to-Point Backhaul (1/2 Mile LOS)

 802.11b/g 2.4GHz Wireless Ethernet Bridge

 

 

54Mbps Outdoor, Short Range

Point to Point Wireless Bridge

 

 

Part#: GNS-1150
Price:

Discontinued

 

This Wireless Bridge kit includes Two Outdoor Access Points, as well as 25ft. of cat5 network cable and all necessary mounting brackets.

 

Features:
Integrated 12db Internal patch antenna

Weather Proof Enclosure

5 different operating modes

54Mbps Transfer Rate

Integrated PoE injector included

U-Bolts for mounting to a pole included

25ft. of cat5 network cable included

Requires Line of Sight (LOS)

 

For Longer range, or higher quality signal, use GNS-1120A, or GNS-1140G

 

 

 

 

Not In StockGNS-1150Contact Us to Buy

 

 

Outdoor Access Points = Ease of Installation

ZERO CONFIGURATION needed as this

wireless bridge comes ready to install "out of the box".

Point.  Shoot.  Connected...

 

This Outdoor 12db Integrated Access Point can be mounted outdoors, and can be powered through the integrated Power-over-Ethernet adapter that comes with the unit.  This means that this access point can be placed up to 300ft. away from your network, with only a single cat5 cable connecting to it.  This makes your network Installation easier to install and maintain. Each Access Point will be configured as a Bridge, and will only communicate with each other.  This means a safer, and more secure network connection for your LAN.

 

Log into the outdoor unit via a cat5 cable, configure the settings to best suit your network, and your ready for installation.  Simply mount the enclosure outside in the direction of your remote location, connect the cat5 network cable to your LAN, and you're ready for connectivity.

 

Please note that this Wireless Bridge requires your two locations to have Line of Sight.  For more information, or to discuss your particular situation, please contact us anytime.  To see other Wireless Bridge packages that do not require Line of Sight, Click Here.

 

Wireless Security:  WEP, WPA wireless security is included in this wireless backhaul.  This will encrypt the data being sent between the connection.  The two radios can also be configured in WDS mode, which enables only the two outdoor access points to communicate with each other, avoiding any other access to the network, wirelessly.  The wireless bridge operates seamlessly as a Wireless Bridge between your two locations.  Share your Wireless Internet connection with neighbors, or relatives, and reduce cost of a separate Internet connection.  Share Wi-Fi Internet.

 

Frequency:  This wireless point to point bridge operates at 2.4GHz, which is the standard Wi-Fi frequency which most indoor routers, and off the shelf access points use.  Portable phones, handhelds and other devices also use the 2.4GHz frequency.  For this reason, if your two locations are in a residential or industrial area, where 2.4GHz Wi-Fi is abundantly present, and the reliability of the wireless bridge is important, you want to consider looking into a 5GHz wireless bridge, which avoids all 2.4GHz interference.  A 5GHz point to point wireless bridge will provide a solid link between your two locations, even in the crowded 2.4GHz area.

Click here for a recommended 5GHz point to point wireless link: GNS-1120A

 

Applications: 

Point to Point wireless video

Share internet connection between 2 buildings

VoIP Applications

Wireless video camera link

 

This Wi-Fi Bridge package includes everything you need to get your two remote locations connected in minutes.  The Wi-Fi Antenna and radio is built into a weatherproof enclosure, allowing you to mount the radio outdoors, connected with only a single cat5 Ethernet Cable.

 

In picture shown to the right, you will see the rear view of the radio, displaying the L-Bracket, and included hardware allowing you to mount directly to a mast up to 2" in diameter.

 

If you are mounting the radio's to a flat surface, such as the side of a home or building, it is recommended that you use the GNS-1433, Universal Antenna Mount.  Click here for more info.

Enclosure Rear View

 

For additional protection from surges, or other surge induced electricity that

may travel through the Ethernet cable, please use the 300SS surge protector.

 

Indoor/Outdoor Canopy Surge Protector

 

Part#: 300SSB

Price: $32.99

 

Features at a glance

  • Adjustable RF output power
  • Onboard LNA for increase receive sensitivity (-91@11Mbps!)
  • Integrated 12dBi panel antenna
  • High power output for long range radio link
  • PoE built-in for single cable installation
  • Fully compliant with IEEE 802.11g standard
  • 54Mbps; 4 times faster than IEEE 802.11b standard
  • Configurable multi-mode AP
    • AP mode
    • AP client mode
    • AP Router
    • AP client router
  • Web GUI device configuration
  • Latest security technologies
    • 64bit & 128bit WEP
    • WPA Personal and WPA Enterprise with TKIP and / or AES
    • WPA2
    • Hidden SSID
    • MAC filtering
  • Comprehensive software functions
  • VoIP-Friendly QoS Mechanism
    • Bandwidth Management, IP ToS

When connecting the Outdoor Cat5 Ethernet cable to the access point, the below image will illustrate how to feed the cat5 cable through the weatherproof adapter, and into the Ethernet port on the access point.  Once tightened, this will provide a weatherproof seal for the RJ45 connector.  Please contact us with any questions.

Call for availabilityGNS-1150Contact Us to Buy

 

 

 

 
 

 

 View Point to Point Wireless Installation Diagram Below:

wireless bridge, point to point wireless backhaul, ethernet bridge, share internet connection, wireless video link, wireless connection, share wifi, long range wireless

NOTE: Linksys routers and universal antenna mounts are for illustration purposes only and are not included in the bridge package.

 

Please Note: The wireless bridge kits listed on this page may also be referred to as 802.11 bridge  802.11 Ethernet bridge, 802.11g wireless bridge, belkin wireless bridge, d link wireless bridge , dlink wifi repeater, dlink wireless bridge, Ethernet bridge router,how to wireless bridge, internet wireless bridge, Linksys point to point wireless , Linksys wifi bridge, Linksys wifi repeater, long range wifi bridge, long range wireless Ethernet bridge, netgear network bridge, netgear wireless bridge, netgear wireless network bridge, outdoor access point bridge, outdoor Ethernet bridge, outdoor wifi bridge, outdoor wireless access point, outdoor wireless bridges, outdoor wireless Ethernet bridge, outdoor wireless point to point, point to multipoint bridge, point to point Ethernet bridge, point to point network connection, point to point router, point to point wifi bridge, point to point wireless bridging, point to point wireless connection, point to point wireless Ethernet, point to point wireless internet, point to point wireless networks, secure wireless bridge, set up wireless bridge, setting up wireless bridge, wifi bridge router, wifi client bridge, wireless access point bridge, wireless bridge access point, wireless bridge antenna, wireless bridge connection, wireless bridge kits, wireless bridge point to multipoint, wireless bridge router, wireless bridge setup, wireless bridge wds, wireless lan bridge, wireless network bridge Ethernet, wireless network bridge, wireless networking bridge, wireless repeater bridge, wireless to wireless bridge, 5GHz point to point wireless backhaul, T1 replacement wireless bridge, T1 point to point, Fiber wireless backhaul.

 
APPLICATION SCENARIOS:

 

QUESTION1:
The information provided on your web site has been very valuable.  Iím looking for some expert advice on how best to reliably and costs effectively extend my homes wireless network to an unattached building on my property. The metal building sits about 75í away from my main residence, with about 15í of elevation change (e.g. slightly up a hill). There are no LOS obstructions and since I live in a very rural area, other wireless traffic is mostly non-existent. I currently use 2 Linksys WRE54G extenders to provide access to the detached building, but the connection does not provide the reliability that I require.
For my home network I currently use a Linksys WRT600N router which manages connectivity very well for about a dozen wireless G and N devices. I currently run WPA-Personal with AES and TKIP encryption, with the N traffic on the dedicated 5 GHz band and G traffic on 2.4 GHz. I have a Linksys WET200 wireless bridge to provide connectivity for some of my home entertainment gear.
My wife has a Mac Book Pro with built in Wireless-N network adapter and our children have notebooks with Wireless-G adapters.  My preference would be to preserve the wireless capability within the classroom. Based upon what Iíve read on your site there are a number of solutions such as WAP with directional antennas or even wireless point to point bridge.  Iím looking to make a purchase and perform the installation immediately and would appreciate any recommendations for a cost effective and reliable solution.

                                                                                                  

ANSWER1:                

What you need is a cost effective point to point bridge to connect the two locations.  This will allow you to have a separate wireless router inside the remote building, which can be used for local access to the laptops in that building.  The part number is GNS-1150, http://www.gnswireless.com/GNS1150_Wireless_Bridge.htm, which includes everything you need to connect the two locations.  At the main location, you will connect the radio to the LAN port on your N router.  On the remote building you will connect the radio to the WAN port on your remote router, (not included.).  The radios should be mounted outside, and pointed at each other.  They are housed in a weather proof enclosure, with a small form factor of 6" x 4" square.  The wireless bridge comes pre-configured, so all you have to do is mount them and power up.

 

------------------------------------------------------------------------------------------

QUESTION2:
I have a customer that needs to connect their network to a building about 300ft away. I was looking at the wireless kit, Part # GNS-1125.  Is this the least expensive solution you offer for share a internet signal between two locations?

 

ANSWER2:

The most cost effective solution to bridge two buildings at 300ft, with clear line of sight, is the GNS-1150, http://www.gnswireless.com/GNS1150_Wireless_Bridge.htm.  This will include everything you need to connect the locations.  The radios are outdoor rated, and weatherproof, similar to the GNS-1125, however, if you only require a simply wireless connection to bridge your two remote locations, and do not require high throughput, the GNS-1150 will work great in your situation.  The connection will operate over the 2.4GHz frequency.

 

------------------------------------------------------------------------------------------

QUESTION3:
Hello, my dad has DSL at his home, I'm 500 ft. farther off the road and can't get the DSL  yet. Want to be able to pick up wireless from my house, the line of sight is pretty well clear what would be the best & cheapest way to do this?
Thank you

 

ANSWER3:      

If you are 500ft. away from your fathers Internet connection, you have two options.  The first would be to use a outdoor antenna mounted to the roof of your home, and point it toward your dads home to receive the signal.  Once it is connected, you would hardwire the cat5 cable directly to your computer.  This would be the cheapest way to get the signal, but quality of the signal depends on how strong he is broadcasting it.  Here is the part number to do so: http://www.gnswireless.com/GNS1655.htm.  A diagram will illustrate how the connection occurs.

 

Another option, and one that may be a bit more reliable, is to create a point to point wireless link between your two locations, which means having an antenna on each end, pointing toward each other.  The antenna on his home connects to the routers LAN port, and the antenna on your home connects to your PC's LAN port.  This will give you a quality signal between the two, and a solid connection.  The radios will be mounted outdoors, and only a single cat5 cable will be required to provide data and power, which simplifies the installation.

Here is the part number to do so:  http://www.gnswireless.com/GNS1150_Wireless_Bridge.htm

 

 RELATED MOUNTING HARDWARE:

*RECOMMENDED

Universal Antenna Mount

Easy Installation for all Antennas

 

Part#: GNS-1433

Price: $27.99

 

 

....................................

 

Click for More Info.

 

....................................

3 foot Antenna Tripod

Requires min. 5ft. Mast

 

Part#: GNS-1631

Price: $44.99

 

 

....................................

Click for More Info.

....................................

12" Wall Mount Bracket

Great for when eve of build-

ing is in the way of antenna.

 

Part#: GNS-1633

Price: $22.99

....................................

 

Click for More Info.

 

....................................

 

Ask us about pre-configuration of these Access Points, so they work "out of the box" and ready to install at your two locations.  

 

 

 
 
   

Return Policy | Terms and Conditions | FAQ | About Us | Contact Us



Copyright © GNS Wireless LLC., 2014

All Major Cards Accepted