Universal Antenna Mount

Provides for Easy Installation for

all Wi-Fi Antennas


 Commercial Grade 54Mbps Point-to-Point Bridge (2 Mile)


Complete 54Mbps Commercial Grade

Point to Point Wireless Bridge

Point to Point Wireless Bridge, Wireless Ethernet Bridge, Backhaul

Part#: GNS-1800a



This Wireless Bridge kit includes Two Outdoor Access Points, as well as 22dBi Grid Antennas and all necessary mounting brackets and

coax cable with Lightning Protection.


External 22dBi Grid Antenna

Commercial Grade Access Point

QOS with Low Latency

54Mbps Transfer Rate

POE Injector Included


Great for Sharing Files


Technical Specs.




For shorter range, use GNS-1806




In StockGNS-1800aContact Us to Buy




Works great in crowded  


       2.4GHz areas or VoIP Applications.



Connect your two locations up to 2 miles apart, using this easy to install Wireless Point to Point Link.  The antennas are 22dBi gain, directional antennas.  Each antenna has 15 degrees of coverage, in one direction, either horizontally, or vertically. 


If the supplied 25ft. of coax cable is not long enough to meet your requirements, ask us about upgrading to a longer coax cable, or use the Included PoE adapter to move the AP closer to the antenna. 


If you are looking for a secure connection between two buildings, but do not wish to use the 5GHz Frequency, please look at the GNS-1800g, which is the same package, but operates at 802.11b/g, using 2.4GHz.  This will give you the same results, and is recommended for more obstructed environments, or short range wireless backhauls.


Just point the antenna in the opposite direction, connect it to the indoor Access Point, and you'll be connected in no time.  The commercial grade Access Points come with the latest in WPA encryption, MAC address filtering and WEP encryption.  Also available is AES Encryption while running in bridge mode for a secure connection.


If you are trying to connect two buildings or locations that are more then 300 feet apart, and notice that there is other 2.4GHz frequencies in the area, or are having Line of Sight issues, then this is your solution.  This Long Range 5GHz Wireless Bridge Package will solve your connection problems immediately.  The included 5GHz outdoor antennas are extremely reliable and easy to install.  With minimum Installation experience required to install these antennas, your Installation will run smoothly.


If your AP is not in an ideal position in order to meet the 25 foot coax cable requirement, this Bridge Kit includes a PoE adapter that will allow you to run power and data through the Ethernet cable.  This will simplify installation times, and maximize the location that the Access Point can be placed.  Depending on your distance between locations, you can also increase the length of the coax cable to 50 or 60ft.


Overall Features:
Controllable High Gain Output.  All radios have +13dBm maximum output. Power can be scaled back for closer installations to avoid noise issues and to meet local regulatory requirements.  Indoor Access Points are housed in commercial, metal enclosure, and can be powered via either direct power adapter, (included), or via Power-Over-Ethernet, (not included).  This will allow you to place the access point up to 200ft. from your network, via a single Ethernet cable.  This wireless bridge package, has very low latency, which is useful when transferring large data files, or for VoIP applications.

Dual Ethernet Ports
This allows you to daisy-chain radios at your installation sites (depending on power requirements). Great for
installing peripheral Power over Ethernet devices like weather monitoring or security cameras.

More Robust Routing Features
Tunneling Protocol Support. Includes support for tunneling protocols such as VPN, PPTP, RSA, etc.

Low Power Requirements
Excellent for solar and other alternative power source installations. TR-500 indoor radios require only 7 Watts of power consumption.

Access Point Features:
Wireless Distribution System (WDS).  WDS allows Access Points to be wirelessly connected to each other while also servicing clients.  Wi-Fi Protected Access (WPA). WPA improves on the security features of WEP. It includes improved data encryption and user authentication.  Mount this access point in cold or temperature sensitive environments and maintain reliability.


Easy Setup and Configuration:
Outside LEDs allow you to easily see if WEP or WPA is activated on your Access Point.  Setup and configuration is user friendly using the web based management included.  Simply open your Internet browser, type in the default IP address, and start configuring the radio to meet the needs of your network.  Real time signal strength meters will tell you exactly when you have the strongest signal between your two radios, optimizing your point to point wireless connection.

Client Adapter (CPE) Features:
Alignment LEDs:  Now you can align your client and point to point installations without having to log into the radio. Get visual signal strength at a glance by using this great feature.


Recommended Antenna Mount:



Universal Antenna Mount

Installation for all Antennas


Part#: GNS-1433

Price: $27.99



Use the following mount (not included) for the easiest mounting of the grid antenna included in this GNS-1800a wireless bridge kit.  One mount is required per location.

The universal mounting arm can mount directly to your building wall, and has the ability to pivot up and down for correct aiming of the antenna.




Frequency 5725-5850 MHz
Gain 22 dBi
Polarization Horizontal or Vertical
Horizontal Beam Width 10
Vertical Beam Width 13
Front to Back Ratio 25 dB
Impedance 50 Ohm
Max. Input Power 100 Watts
VSWR < 1.5:1 avg.
Weight 3.0 lbs. (1.4 kg)
Grid Dimensions 12 x 15.7 inches
(300 x 400 mm)
Mounting 2 in. (50.8 mm) diameter mast
Operating Temperature -40 C to to 85 C
(-40 F to 185 F)
Lighting Protection DC Ground
Connector N-Female






IEEE 802.11a

Data Rates

1, 2, 5.5, 11, 54 Mbps

LAN Interface

10/100BaseT Ethernet


5.3 - 5.8 GHz

Radio Mode

Station Adapter Infrastructure


Half Duplex

Transmit Power


Receive Sensitivity

-73dBm @ 54Mbps

-85dbm @ 6Mbps


Up to 1.5+ miles Point-to-Point


Horizontal or Vertical

Antenna Beam width

External Antenna Dependant


40-bit & 128-bit WEP/ WPA / WPA2

Remote Configuration

Based on IP Address


13" x 10"

Operating Temperature

-65 deg C  to +60 deg C


Includes Pole Mount Hardware


100 meter maximum cat5 cable



Note:  Depending on your distance, these wi fi antennas do not require perfect Line-of-Sight to each other in order to establish a secure, reliable connection, however they do require that you have Near Line-of-Site (nLOS).  We do recommend that you mount the wi fi antenna at the highest possible location to avoid any and all obstructions for the best performance of the point to point wireless backhaul.


In StockGNS-1800aContact Us to Buy






Universal Antenna Mount

Easy Installation for all Antennas


Part#: GNS-1433

Price: $27.99





Click for More Info.



3 foot Antenna Tripod

Requires min. 5ft. Mast


Part#: GNS-1631

Price: $44.99




Click for More Info.


12" Wall Mount Bracket

Great for when eve of building

is in the way of antenna.


Part#: GNS-1633

Price: $22.99



Click for More Info.



Ask us about pre-configuration of these Access Points, so they work "out of the box" and ready to install at your two locations.  




Return Policy | Terms and Conditions | FAQ | About Us | Contact Us

Copyright GNS Wireless LLC., 2014

All Major Cards Accepted