Universal Antenna Mount

Provides for Easy Installation for

all Antennas



Coax Sealant included.



 Tech. Support Included


   1 - Year



 108Mbps Outdoor Wireless Bridge Kit (1 Mile), Complete


Part#: GNS-1802


Discontinued:  See GNS-1120A



Two Outdoor 13dBi Antennas

Two Lightning Protectors

Two DWL-2100 Access Points

Two 25ft. Antenna Cables

Connect Two Locations 2 miles

Requires Line of Sight

108Mbps Transfer Rate

Includes Mounting Brackets

Technical Support Included


Click for Mounting Hardware

Upgrade to GNS-1816 for speed

   and stronger signal strength.




Connect your two locations up to 2 miles apart, using this easy to install wireless bridge kit.  The antennas are 13dBi gain, directional antennas.  Each antenna has 30 degrees of coverage, in one direction.  


Just point the antenna in the opposite direction, connect it to the D-Link DWL-2100AP's, and you'll be connected in no time.  D-Link DWL-2100AP's come with latest in WPA encryption, MAC address filtering and WEP encryption.  5 times faster then 802.11b.  Each Access Point has the ability to transfer throughput up to

108Mbps in Super G Mode.  For better signal strength, and more reliable throughput, ask us about upgrading this Wireless Bridge Kit to use the DWL-2200AP's.


Antennas are a 13dBi gain, directional antenna, that are non-obtrusive and easy to mount.  With these antennas, you will be able to connect any two locations together.  Share files, Internet access, video, music or any other files.


If your AP is not in an ideal position in order to meet the 25 foot requirement, please take a look at our Power-over-Ethernet adapters, (POE).  You can also upgrade this bridge kit to use a stronger 15dBi patch antenna, which will allow you to get better signal strength, and use a longer coax cable. Please view our

GNS-1816, which is the same as this bridge kit, with upgraded 15dBi patch antennas.


Lightning Arrestors:

When using outdoor antenna installations, it is always possible that an antenna will suffer damage from potential charges developing on the antenna and cable, or surges induced from nearby lightning strikes.

The 2.4GHz Lighting Protector that is Included in all of our Wireless Bridge packages will provide protection to 2.4 GHz radio equipment from static electricity and lightning-induced surges that travel on coaxial

transmission lines. This system needs to be properly grounded as  identified in the hardware installation manuals of the products.  For grounding hardware, please click here.


Note:  These antennas require Line-of-Sight to each other in order to establish a secure, reliable connection.  If you have LOS issues, then check out our NLOS (Non Line-of-Sight) packages.


If you have a few trees in the way, or if you want a better signal connection between your two locations, ask us to upgrade your bridge kit with a DWL-2200AP.  This will get your better range, and increased reception.


• IEEE 802.11b/g
Device Management
• Web-Based – Internet Explorer v6 or later; Netscape Navigator v6 or later; or other Java- enabled browsers.
• SNMP v.3
Wireless Distribution System
• AP Client, PtP Bridge, PtMP Bridge, Repeater, WDS
• 64, 128, 152-bit WEP
• WPA —Wi-Fi Protected Access
• MAC Address Access Control (WPA-TKIP and WPA-AES)
Wireless Frequency Range
• 2.4GHz to 2.4835GHz
Wireless Signal Range*
• Indoors: Up to 328 ft (100 meters)
• Outdoors: Up to 1312 ft (400 meters)
Wireless Transmit Power
• 15dBm (32mW) ± 2dB (Control TX power level from full, 50%, 25%, 125% and min.)
Receiver Sensitivity*
• 54Mbps OFDM, 10% PER,-66dBm)
• 48Mbps OFDM, 10% PER,-71dBm
• 36Mbps OFDM, 10% PER,-76dBm
• 24Mbps OFDM, 10% PER,-80dBm
• 18Mbps OFDM, 10% PER,-83dBm
• 12Mbps OFDM, 10% PER,-85dBm
• 11Mbps CCK, 8% PER,-83dBm
• 9Mbps OFDM, 10% PER,-86dBm
• 6Mbps OFDM, 10% PER,-87dBm
• 2Mbps QPSK, 8% PER,-89dBm
External Antenna Type
• 1.0dB Dipole with reverse SMA connector


In StockGNS-1802Contact Us to Buy






 View Point to Point Wireless Installation Diagram Below:



I am looking for a Wireless Bridge kit to bridge between 2 buildings. There is a clear line of sight with not obstructions in the way. I have 2 D-Link DWL-2100AP (newer model of DWL-2100). The distance between the 2 locations is over a half mile but under a mile. There will be 4 computers at the main location with 6 computers at the remote location. Large files will be transferred between locations. The main reason for the connection is for internet access between buildings. Can you tell me a solution that will best fit my situation? I was looking at part#: GNS-1802 but I don't know if the newer D-Link access points will work and I would not need them in the kit. Let me know if you would possibly be able to help. Let me know what the cost would be as well as a parts list.



For that distance, you can use the 13dBi patch antennas that are included with the kit, with 25ft. coax cables, and Lightning arrestors, which will be everything you need to adapt to your existing DWL-2100AP's.  This solution will be cheaper, and give you a better signal then the dipole antennas.  To order the GNS-1802 without the D-Link DWL-2100AP included, please contact us directly, and we will assist you with the part numbers over the phone.  Here is a link to the GNS-1802 wireless bridge kit, http://www.gnswireless.com/GNS1802.htm


All items are in stock, and if you have any other questions, or concerns, please feel free to contact us anytime.




Universal Antenna Mount

Easy Installation for all Antennas


Part#: GNS-1433

Price: $27.99





Click for More Info.



3 foot Antenna Tripod

Requires min. 5ft. Mast


Part#: GNS-1631

Price: $44.99




Click for More Info.


12" Wall Mount Bracket

Great for when eve of build-

ing is in the way of antenna.


Part#: GNS-1633

Price: $22.99



Click for More Info.




Ask us about pre-configuration of these Access Points, so they work "out of the box" and ready to install at your two locations.  




Return Policy | Terms and Conditions | FAQ | About Us | Contact Us

Copyright © GNS Wireless LLC., 2014

All Major Cards Accepted