Outdoor Enclosure for
Hot & Cold Environments
The box is a rugged weatherproof enclosure that is ideal for
both indoor and outdoor applications. Constructed from molded
fiberglass reinforced polyester, it is well suited for high
temperature or corrosive environments. The mounting flange
allows it to be wall mounted as well as on a flat surface. The
raised lid features a stainless steel continuous hinge and
stainless steel quick release latches with padlock hasps. The
raised lid is fully gasketed. The enclosure material is UV
stabilized and comes in machine tool gray.
The internal plate features four standard surge protected 120
VAC outlets and a terminal strip to supply power to internal
To help ensure trouble-free operation of electronic equipment,
proper operating temperatures inside an enclosure needs to be
maintained. With the built-in Heater and Cooling fan, internal
temperatures can be better maintained. This model is ideal in
Hot and/or Cold environments.
The outdoor enclosure includes a thermostat-controlled 200W
heating system and cooling fan. The heater turns on when the
internal temperature drops to 40° F (4° C) ±7° and turns off at
60° F (15° C) ±5°. The heater does not require the use of any of
the AC outlets, leaving them all available for your equipment.
No extra room for the heater is required since it is mounted
underneath the plate.
For cooling, the thermostat-controlled high airflow, low noise
22W (max) fan used allows air to be pushed or pulled through the
enclosure. Filters for both ports are easily removable for
cleaning and replacement. The fan turns on when the internal
temperature rises to 120° F (49° C) ±5° and turns off at 90° F
(32° C) ±10°. Like the heater, the cooling fan does not require
the use of any of the AC outlets, leaving them all available for