8dbi Outdoor Omni Antenna

8dBi Outdoor Omni Ant.

360/12 Pattern

N-Male for Direct Connect

Click for More Info.

 

 

Coax Sealant is included.

 

5.15-5.35GHz Weatherproof, POE Amplifier

5.3GHz AGC Bi-Directional Outdoor POE WiFi Amplifier with Pole Mount Kit & POE Power Supply.  U-NII 5.15-5.35.  1.5W Pk / .5W Avg. 

 

 

Part#: 5300SAX-PK
Price:

CALL

 

Features:
Power Over Ethernet (Injector Not Included)

N-Female Connectors

Tx Power 500mW Avg. 1500mW Peak

Low receive Noise Figure

TX/RX LED Indicator

Automatically senses incoming RF signal

Up to 30 dBm Transmit Gain

Up to 20 dBm Receive Gain

In Stock5300SAX-PKContact Us to Buy

 

 

This Outdoor 1 watt Power over Ethernet, PoE,  802.11a amplifier is designed for 802.11b/g Wireless Network Installations.  Designed for extending the range of 5GHz Wireless Radio devices, the outdoor PoE amplifier is particularly effective when used with Direct Sequence or Frequency Hopping Spread Spectrum radio modems.  This Outdoor unit provides transmit power amplification and receives signal gain.

 

By using the integrated PoE feature of this amplifier, you will be able to mount your Access Point outdoor, and connect an amplifier inline with an updated PoE device.  The cat5 cable will connect from your PoE unit located indoors, and connect to the amplifier.  You will then connect the cat5 cable from the amplifier to the outdoor access point.  From the access point, a short coax cable will connect the RF output NF connector to the NF connector on the amplifier.  You will then connect the outgoing RF connector on the amplifier to the High gain antenna.  This will not only increase your transmit power, but also increase your receive sensitivity for the access point.  For users that are on the brink of connecting to your access point, an outdoor amplifier is what you need.

 

Applications:

  • 5GHz Systems
  • High Cable Loss Installations
  • Harsh Environment Installations
  • Tower Top or Enclosed Installations
  • Point to Point or Hot Spot Installations

 

Full output power of 1 Watt  is achieved with only 5mW input to the amplifier.  Above 5mW input, the SmartAmp attenuates the input signal power and maintains the output power typically at 1 Watt.

 

If you are unsure if this amplifier will work in your Wireless Network Installation, please contact us to discuss.

Please review and obey all FCC part 15 rules and regulations with regards to installation of Wi-Fi amplifiers.  Only network professionals should be installing 802.11 network amplifiers.

 

Simple Diagram of installation located below:

 

 

Technical Specifications
 

Features:

802.11a 1W Outdoor

Frequency Bands:

Public Safety: 4.940-4.990 GHz

U-NII Lower & Middle: 5.15-5.35 GHz

CEPT & U-NII Upper: 5.47-5.825 GHz

Amp POE Input Voltage: +18 to 50 VDC
Operating Mode:

Bi-directional, TDD

Transmit:

AGC Power : Avg. Power: 500mW (27dBm)

Peak Power 1500mW (+32dBm)

Compression Point: P1dBm = 1500mW (+32dBm)

RF Input Power for Turn-On: > 1 dBm

Harmonic Rejection: 2fo > 55 dBc, 3fo >70dBc @ Po=+27dBm

Supply Current: < 1A

RX to TX Switching: < 500nSec

Receive:

Gain: 12 dB +/- 2 dB

Noise Figure: 2.5 dB

Supply Current: < 250 mA

TX to RX Switching: < 500nSec

Maximum Ratings:

Radio Port: +30dBm

Antenna Port: +27dBm

Size / RF Conn:

7.95 x 7.03x 2.50 ( Two RF Connectors -N Female )

(One Waterproof CAT-5 Female)

Rugged aluminum die-cast chassis, with white power coat finish

Temperature:

-40 to +70 Degree C

Lightning Suppression:

Antenna N-Connector, 1/4 wavelength DC Short

POE IN/OUT, 500W Surge Protection

Weight:

< 3.7lbs.

 

 

 
 

 

 RELATED MOUNTING HARDWARE:

*RECOMMENDED

Universal Antenna Mount

Easy Installation for all Antennas

 

Part#: GNS-1433

Price: $27.99

 

 

....................................

 

Click for More Info.

 

....................................

3 foot Antenna Tripod

Requires min. 5ft. Mast

 

Part#: GNS-1631

Price: $44.99

 

 

....................................

Click for More Info.

....................................

12" Wall Mount Bracket

Great for when eve of build-

ing is in the way of antenna.

 

Part#: GNS-1633

Price: $22.99

....................................

 

Click for More Info.

 

....................................

 

Ask us about pre-configuration of these Access Points, so they work "out of the box" and ready to install at your two locations.  

 

 

 
 
   

Return Policy | Terms and Conditions | FAQ | About Us | Contact Us



Copyright GNS Wireless LLC., 2014

All Major Cards Accepted