Universal Antenna Mount

Provides for Easy Installation for

all Wi-Fi Antennas


400 Watt, 24 Volt , 20 Amp


Part#: TPW-400-24




Startup speed of 2.1m/s (4.5mph)

Smooth and Quiet, Sealed turbine

Sealed die cast aluminum housing

Easy installation

Electronic over-speed protection









In StockTPW-400-24Contact Us to Buy





The TPW Series Wind Turbines from Tycon Power Systems are lightweight at less than 8.5kg and are designed for ease of installation and long service life. The generator is a very low cogging force design for better performance in light winds and is packaged in a fully sealed die cast anodized aluminum enclosure. There are no brushes to wear out or cause electrical noise and the bearings are sealed so the system is maintenance free. The blades are glass reinforced polypropylene for high strength, UV resistance and fatigue resistance. The turbines are available in a 24V 10A.

The permanent magnets used are Neodymium Iron Boron (NdFeB) for higher power output.

Mounting is to the top of a 51mm (2) OD standard pole. The mount system is a vibration isolation type to minimize vibrations being carried down the mounting pole. The hardware used is stainless steel for corrosion protection. 


Startup Wind Speed: 2.1m/s (4.5mph)
Power Rating (12.5m/s) 250W
Max Power Output: 24V
Rotor Diameter: 1.12m (3.7ft.)
Wind Survivability: 35m/s (78mph)
Over-speed Protection: Electronic
Monthly Energy Production: 155kWh @ 5.4m/s (12mph)
Mounting Pole Required: 48mm to 51mm (2") OD
Weight: 10.5kg (23lb)








Indoor 1000mw Amp

Includes Power Supply

802.11b/g (NF Conn.)


Part#: GNS-1460

Price: $299.99

Click for More Info.



Outdoor 1000mw Amp

Includes DC Injector/PS

802.11b/g mode


Part#: GNS-1461

Price: $319.99

Click for More Info.


Return Policy | Terms and Conditions | FAQ | About Us | Contact Us

Copyright GNS Wireless LLC., 2014