12dBi Antenna

Range = Varies on AP.

Wi-Fi Signal booster


Part#: GNS-1455

Price: $114.99


Click for More Info.




15dBi Antenna

Range = Varies on AP.

Wi-Fi Signal booster


Part#: GNS-1456

Price: $139.99


Click for More Info.





2.4GHz Weatherproof Access Point

2.4 GHz 802.11b/g Outdoor Access Point, w/ N-Female connector for external antenna.  AP/Bridge/CPE modes, with External LED's, POE/PS included.  23dBm TX/RX power.



Mouse over Picture to View Back Panel.

Part#: GNS-1643



N-Female Antenna Connector

Weather Proof Enclosure

Connects to any Ethernet device

54Mbps Transfer Rate

POE/PS Included

23dbm Radio, TR-6000

Dual Ethernet Ports


Technical Specs.



In StockGNS-1643Contact Us to Buy




This Outdoor Integrated Access Point can be mounted outdoors, and can be powered through the integrated Power-over-Ethernet adapter that is included with the unit.  This means that this access point can be placed up to 300ft. away from your network, with only a single cat5 cable connecting to it.  This makes your network Installation easier to install and maintain.  The integrated NF Connector allows you to connect an Omni directional antenna to the access point to receive or send a signal in any direction you choose.  Please choose your external antenna by clicking here, or contact us directly for product recommendation.


This Access Point can be mounted directly outdoors, as it is housed in a weatherproof enclosure.  With its integrated patch antenna, and weatherproof Ethernet connection, it provides a better signal strength, and a much easier installation, as only a single cat5 cable needs to be connected from the outdoor radio, to the indoor power supply.


Features at a glance

  • Dual Ethernet Ports:  This will allow you to daisy chain radios at your installation sites.  This can benefit you as an installer, as the dual Ethernet ports will allow you to plug in PoE devices such as network cameras or other Outdoor Access Points.

  • More Robost Routing Features:  Includes Tunneling Protocol Support, which will allow you to pass through VPN clients, as well as use tunneling protocols such as VPN, PPTP, RSA and others.

  • Low Power Requirements:  Excellent solution for solar and other alternative power source installations.  The Tranzeo 60xx series requires only 5.5 watts in order to operate correctly.

  • All New Access Point Features:  WDS will allow this outdoor Access Point to be wirelessly connected to other Access Points, while still servicing clients.  (Wireless Distribution System)

  • Wi-Fi Protected Access (WPA):  Wireless Protected Access improves on the security features of WEP.  It includes improved data encryption and user authentication.

  • All New Client Adapter Features:  With this Outdoor Access Point, you will be able to align your client and point-to-point installations without having to log into the radio.  You will get visual signal strength at a glance by using this great new feature, using the alignment LED's located on the back of the Access Point.

  • Controllable High Gain Output:  All radios have 23dBm maximum output.  This works great for long distance Point-to-Point applications, as well as Client applications.  Power can be scaled back for closer installations to avoid noise issues and to meet local regulatory requirements.

  • Wireless Interference:  This wireless access point  is operating at 2.4GHz.  This means that if you have a high number of 802.11b/g nodes around your two locations, it is possible that you will experience interference.  This can result in poor wireless performance, dropped packets, slow connection, and high latency.  If you are using the radios for a point to point wireless application, avoid the Interference of other 802.11b/g radios by moving to a 802.11a, 5GHz point to point wireless bridge.  Click here for an 802.11a wireless bridge, or contact us for more information.


Technical Specs.

Standard IEEE 802.11b/g
Data Rates Supported 1, 2, 5.5 and 11, 54 Mbps
LAN Interface 10BaseT Ethernet
Frequency Band 2.4GHz to 2.5GHz
Radio Mode Access Point / Point-to-Point / CPE
Communication Method Half Duplex
Transmit Power +23dBm Maximum
Operating Channels 11 FCC
Non-overlapping Channels 3
Receive Sensitivity -85dBm @ 11Mbps, -90dBm @ 1Mbps
Range Up to 3+ miles Point-to-Point
Polarization Horizontal or Vertical
Antenna Beamwidth NF Connector
Encryption 40-bit & 128-bit WEP, MAC filter, WPA
Remote Configuration Support Based on IP Address
Dimension (L x W) "13 x 10 radio only"
Unit Weight 0.55 kg (2.09 lbs)
Environmental Operating Temperature -65 deg C ) to +70 deg C
Mounting Pole or wall mount via 2 pc U-Bolts & clamps (included)
Power Consumption 350 mA at 12V DC
Cable 100 meter maximum cat5 cable

Specifications are subject to change without notice.

Subject to local regulations.


In StockGNS-1643Contact Us to Buy




Pre-Fabricated Cat5

All Lengths available







Click for More Info.



Linksys WAP54G

54Mbps Wireless Access Point


Part#: WAP54G

Price: $79.99




Click for More Info.




Return Policy | Terms and Conditions | FAQ | About Us | Contact Us

Copyright GNS Wireless LLC., 2014